Gitnux/Report 2026

Electronic Design Automation Industry Statistics

308Statistics
55Sources
12Sections
1Visuals
51mRead
Samuel NorbergWritten by Samuel Norberg·Fact-checked by Maya Johansson
Published
How this report is researched
01Editorial Scope

Before any source is gathered, an editor locks the question, what qualifies, and how the piece will be judged.

02Source Research

Search agents collect the source set and pull each data point out with its provenance attached.

Read our full methodology →

Search agents attach provenance to every extracted figure.

Next review: within 39 days

01 Industry overview

The electronic design automation industry at a glance

The electronic design automation industry reached $15.2 billion in 2024 and remains highly concentrated, with Synopsys, Cadence and Siemens controlling more than 88% of the global market.

$15.2B[7]
Global EDA market, 2024
9.9%[7]
Forecast CAGR, 2024–2030
71,517[2]
Industry employees, Q4 2025
88%+[7]
Top-three market share, 2024
Market size
The global EDA market was valued at $15.2 billion in 2024. The broader electronic system design industry reported $5.4663 billion in revenue in the fourth quarter of 2025, including EDA, semiconductor IP and services.[7][2]
Forecast & CAGR
PwC forecasts the global EDA market to reach $26.8 billion by 2030, implying a 9.9% compound annual growth rate from 2024 to 2030. A separate 2025 market estimate places the software segment at $17.8 billion, reflecting differences in market scope.[7][47]
Market share & regions
In Q4 2025, the Americas was the largest reporting region with $2.4735 billion of electronic system design revenue, followed by APAC at $2.0508 billion, EMEA at $683.4 million and Japan at $258.5 million. Year over year, APAC grew 11.3% and the Americas grew 13.9%, while Japan declined 18.8%.[2]
Segmentation
Q4 2025 revenue comprised $2.0832 billion from semiconductor intellectual property, $1.8874 billion from computer-aided engineering, $777.2 million from IC physical design and verification, $484.6 million from PCB and multi-chip-module layout, and $233.9 million from services.[2]
Key players & concentration
Synopsys, Cadence and Siemens accounted for more than 88% of the global EDA market in 2024, according to PwC analysis. A 2024 industry value-chain analysis attributed 32% to Synopsys, 30% to Cadence, 15% to Siemens EDA, 5% to Ansys and 1% to Empyrean.[7][40]
Trends, drivers & challenges
Growth is being driven by AI-related chip demand, hyperscaler adoption and increasing design complexity. In Q4 2025, semiconductor IP revenue grew 18.3% year over year and services grew 19.6%, while IC physical design and verification declined 2.6%, highlighting uneven demand across the design flow.[2][28]
Consumer behavior & competition
EDA demand is concentrated among semiconductor companies, foundries, hyperscalers and electronics manufacturers that require integrated, multi-stage design flows. Cadence reported that its Core EDA business grew 13% in 2025, driven by hyperscaler adoption, broader digital full-flow deployments and AI-enabled products.[28]
M&A
Synopsys completed its acquisition of Ansys on July 17, 2025, for approximately $34.9 billion. The transaction expanded Synopsys into simulation and analysis and was described by the company as targeting a combined $31 billion total addressable market.[29][18]
Regulation
U.S. export controls remain a material industry constraint. In January 2025, the Bureau of Industry and Security strengthened controls covering advanced computing semiconductors, software and technology, while a July 2025 final order cited unauthorized exports of EDA hardware, software and semiconductor design technology by Cadence China.[48]
Latest news
The latest broad industry data available reports that Q4 2025 electronic system design revenue rose 10.3% year over year to $5.4663 billion, with participating-company employment up 13.8% to 71,517. The most significant recent structural event was Synopsys completing its Ansys acquisition in July 2025.[2][29]
report visual · Comparison

Revenue of the largest electronic design automation companies

Siemens leads with $85.2B in annual revenue (group level, converted to USD).

Siemens$85.2B
Synopsys$7.1B
Keysight Technologies$5.4B
Cadence Design Systems$5.3B
Silvaco Group$63M
source-verifiedassets.new.siemens.com · news.synopsys.com · investor.keysight.com · investor.cadence.com · investors.silvaco.com2025

02 Ranking

Top 9 Companies in the Electronic Design Automation Industry

The leading companies in the electronic design automation industry, ranked on market impact, performance, momentum, innovation and brand popularity.

Updated November 10, 2026 · Next review December 10, 2026

Verdict

Cadence Design Systems and Synopsys are tied at the top of Gitnux's 2026 electronic design automation ranking with an Overall score of 9.6 each.

Ranked by Overall score · How we score ↓

Editor's top 3 picks

Where to start, by need.

  1. #1 Overall · Leader in simulation & Verification

    Cadence Design Systems

    US

    Ranked #1 · 9.6 · Simulation & Verification

    Why we picked it: Core EDA products plus broader deployments supported 14% fiscal-2025 growth, backed by $4.822 billion product-and-maintenance revenue.

    See in ranking ↓Visit cadence.com ↗

  2. #2 overall

    Synopsys

    US

    Ranked #2 · 9.6 · Simulation & Verification

    Why we picked it: Verification, IP and simulation scale is reflected in $6.1 billion annual revenue and 40.4% R&D intensity.

    See in ranking ↓Visit synopsys.com ↗

  3. Leader in engineering Measurement Design

    Keysight Technologies

    US

    Ranked #4 · 8.9 · Engineering Measurement Design

    Why we picked it: The RF, microwave and semiconductor design software emphasis aligns with an 8% revenue growth signal.

    See in ranking ↓Visit keysight.com ↗

Pick 1 is the #1 company overall. Pick 2 is the highest-ranked company in the top 5 that adds a new segment; no further segment places in the top 5, so pick 3 follows rank.

Full ranking

Sort by
Top 9 companies in the electronic design automation industry, 2026 – Gitnux ranking
#CompanyOverall ↓Company snapshot
1

Cadence Design Systems

Simulation & Verification · US

9.6
2

Synopsys

Simulation & Verification · US

9.6
3

Siemens

Simulation & Verification · DE

8.9
4

Keysight Technologies

Engineering Measurement Design · US

8.9
5

Empyrean Technology

IC design, manufacturing and packaging EDA software · CN

8.0
6

Agnisys

Design Flow Automation · US

7.9
7

Aldec

Design Flow Automation · US

7.8
8

Silvaco Group

TCAD & Analog Tools · US

7.6
9

Sigasi

Design Flow Automation · BE

7.4

How we score

  • Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
  • Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
  • Momentum (20%): growth trajectory and future potential.
  • Innovation (15%): R&D intensity and how technologically advanced the company is.

Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.

Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.

Cadence Recalculated when new figures are published; next review December 10, 2026.

Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.

Cite this ranking

APA

Samuel Norberg. (2026, November 10). Top 9 companies in the electronic design automation industry. In Electronic Design Automation Industry Statistics. Gitnux. https://gitnux.org/electronic-design-automation-industry-statistics/#top-companies

04 Statistics

Technology & Innovation

The innovation signal is anchored in measurable AI-era outcomes, including 2x faster turnaround for a CPU using Synopsys VSO.ai in 2024, while Q4 2025 revenue reached $5,466.3 million.

AI in the electronic design automation industry

  • 2x faster turnaround time was reported for a CPU using Synopsys VSO.ai in 2024.[1]
  • 20% faster turnaround time was reported for a FinFET CPU using Synopsys DSO.ai in 2024.[1]
  • 25% lower power was reported for a 4nm mobile SoC using Synopsys DSO.ai in 2024.[1]
  • 6.5% smaller area was reported for a 6nm mobile design using Synopsys DSO.ai in 2024.[1]
  • 4.5% higher maximum operating frequency was reported for a 5nm HPC design using Synopsys DSO.ai in 2024.[1]
  • 15% higher coverage was reported for an automotive SoC using Synopsys VSO.ai in 2024.[1]

Automation in the electronic design automation industry

  • $5,098.3 million was global electronic system design industry revenue in the first quarter of 2025.[2]
  • $5,466.3 million was the global electronic system design industry revenue in the fourth quarter of 2025.[2]
  • $1,924.2 million was APAC electronic system design procurement in the first quarter of 2025.[2]
  • $2,223.0 million was APAC electronic system design procurement in the third quarter of 2025.[2]
  • 8.8% was year-over-year electronic system design industry revenue growth in the third quarter of 2025.[2]
  • $264.0 million was Japan electronic system design procurement in the third quarter of 2025.[2]

Digital Transformation in the software and IT services sector (sector benchmark)

  • 45% of North American technology and business decision-makers planned to adopt AI and machine learning to improve business within 12 to 24 months.[3]
  • 75% of digital leaders globally planned to increase AI-related business expenditure in 2024.[3]
  • 34% of surveyed organizations globally identified replacing or upgrading legacy technology as a top digital-transformation goal in 2024.[3]
  • 72% of digital leaders globally expected to increase technology spending in 2024, compared with 50% of digital laggards, according to a survey of 855 technology and business decision-makers.[3]
  • 54.8% of surveyed organizations reported having a chief digital officer or another executive responsible for digital transformation.[4]

Technology Adoption in the software and IT services sector (sector benchmark)

  • 57.7% of surveyed organizations reported having a chief information security officer or equivalent in 2024.[4]
  • 67.6% of IT services were delivered through cloud infrastructure among surveyed organizations in 2024.[4]
  • More than 50% of surveyed global IT decision-makers were exploring AI use cases or piloting AI technologies in 2024.[3]
  • 51.8% of surveyed organizations reported that AI solutions were somewhat or extremely rare in 2024.[4]

Cloud Computing in the software and IT services sector (sector benchmark)

  • 71.5% of EU enterprises using paid cloud services used them for file storage in 2025.[5]
  • 52.7% of EU enterprises with at least 10 employees used paid cloud-computing services in 2025.[5]
  • 26.1% of EU enterprises using paid cloud services used computing platforms for application development, testing or deployment in 2025.[5]
  • 71.7% of EU enterprises using paid cloud services used them for office software in 2025.[5]
  • 65.5% of EU enterprises using paid cloud services used them for security software applications in 2025.[5]
  • 85.2% of EU enterprises using paid cloud services used them for email in 2025.[5]

Big Data in the software and IT services sector (sector benchmark)

  • 40% was the highest reported enterprise adoption rate for big-data analytics across OECD countries in the latest available data through 2023.[6]
  • 14% of enterprises with at least 10 employees across the OECD used big-data analytics on average, based on 2022 data or the latest available year.[6]
  • Big-data analytics adoption averaged 14% among OECD enterprises with at least 10 employees, compared with 49% for cloud computing in the latest comparable data.[6]

05 Statistics

Data & Analytics

Spend and procurement move with category gaps: ESD industry revenue was $5,747.8 million in Q1 2026, while IC physical-design and verification was $751.3 million.

Business intelligence in the electronic design automation industry

  • $751.3 million was IC physical-design and verification revenue in Q1 2026, representing 8.3% year-over-year growth.[2]
  • $2,264.4 million of ESD products and services were procured in APAC in Q1 2026, up 17.7% year over year.[2]
  • $5,747.8 million was ESD industry revenue in Q1 2026, up 12.7% year over year globally.[2]
  • 93% or more of the global EDA market is projected to be held by Synopsys, Cadence and Siemens by 2030.[7]
  • $2,018.4 million was CAE revenue in Q1 2026, representing 15.5% year-over-year growth.[2]
  • $2,332.5 million was semiconductor intellectual-property revenue in Q1 2026, representing 14.1% year-over-year growth.[2]

Data analytics in the electronic design automation industry

  • 60,106 employees worked at companies tracked by the ESD Alliance in Q4 2023, up 8.9% from Q4 2022.[2]
  • $2,298.7 million of ESD products and services were procured in APAC in Q2 2026, up 22.4% year over year.[2]
  • $5,710.8 million was ESD industry revenue in Q2 2026, up 12.2% from Q2 2025 globally.[2]
  • $2,443.5 million of ESD products and services were procured in the Americas in Q2 2026, up 7.1% year over year.[2]
  • $818.3 million was IC physical-design and verification revenue in Q2 2026, up 16.6% year over year.[2]
  • $2,199.0 million was semiconductor intellectual-property revenue in Q2 2026, up 20.4% year over year.[2]

Data Quality in the software and IT services sector (sector benchmark)

  • In 2025, 46% of organizations globally said they were fully confident in their data quality, across surveyed technology and business organizations.[8]
  • In 2025, 43% of organizations globally rated their data excellent for quality and completeness, across surveyed technology and business organizations.[8]
  • In 2025, 34% of organizations globally rated their data excellent for relevance and suitability, across surveyed technology and business organizations.[8]
  • In 2025, 35% of organizations globally rated their data excellent for consistency and standardization, across surveyed technology and business organizations.[8]
  • In 2024, 95% of enterprise data leaders and practitioners reported a data-quality issue with a direct impact on business outcomes, across companies with at least $1 billion in revenue.[9]
  • In 2025, 46% of organizations globally rated their data excellent for accuracy and integrity, across surveyed technology and business organizations.[8]

Data Governance in the software and IT services sector (sector benchmark)

  • In 2024, 35% of U.S. technology executives prioritized data governance among their data-management areas for the next 12 months.[10]
  • In 2024, 81.7% of organizations reported having no data-governance or catalog solution as part of their governance program, according to a global governance study.[11]
  • In 2026, 76% of global data leaders said their company’s AI governance did not completely keep pace with employee use of AI technology.[11]
  • In 2024, 61% of supply-management organizations reported having a dedicated data-governance function, based on an Institute for Supply Management survey.[12]
  • In 2024, 32% of global technology leaders prioritized data governance among their data-management areas for the next 12 months.[10]
  • In 2024, 18.3% of organizations reported having a data-governance or catalog solution as part of their governance program, according to a global governance study.[11]

KPIs in the electronic design automation industry

  • 13,800 employees worked at Cadence as of December 31, 2025.[13]
  • $997.390 million was Cadence’s net receivables balance at December 31, 2025, compared with $704.639 million in 2024.[13]
  • $7.8 billion was Cadence’s year-end backlog for fiscal 2025, up from $6.8 billion in 2024.[13]
  • $3.8 billion of Cadence’s remaining performance obligations were expected to be recognized as revenue within 12 months at the end of 2025.[13]
  • $87.3 million was Cadence royalty revenue recognized from prior-period performance obligations in fiscal 2025.[13]
  • $5.9 billion to $6.0 billion was Cadence’s fiscal 2026 revenue outlook.[13]

06 Statistics

Strategy & Growth

Platform expansion and collaboration are framed by the market trajectory, with the forecast of $26.8 billion by 2030 at 9.9% CAGR from 2024.

Growth in the electronic design automation industry

  • $15.2 billion was the global EDA market size in 2024, according to PwC analysis.[7]
  • 11% was the year-over-year increase in overall electronic-system-design revenue in the fourth quarter of 2024.[2]
  • $26.8 billion is the forecast global EDA market size for 2030, representing a 9.9% CAGR from 2024.[7]
  • $7.054 billion was Synopsys’ fiscal-year 2025 revenue, up approximately 15% year over year.[13]
  • $6.8 billion was Cadence’s record backlog at the end of 2024.[13]
  • 14% was Cadence’s fiscal-year 2025 revenue growth.[13]

Differentiation in the electronic design automation industry

  • 100x workflow speedup is the target for Cadence solutions accelerated with NVIDIA technologies.[14]
  • 2 design goals—power, performance and area optimization and earlier feasibility assessment—are targeted by Siemens’ Precision Innovations acquisition.[15]
  • 70% of Cadence’s fiscal-2025 revenue came from Core EDA products.[13]
  • 6 of 8 U.S. Microelectronics Commons hubs selected Keysight EDA software in 2024.[16]
  • 10x productivity improvement was demonstrated by more than 10 early Cadence ChipStack AI Super Agent customers in 2026.[14]
  • 3D-IC support for wafer-scale systems with hundreds of chiplets is included in Cadence’s 2026 TSMC partnership.[17]

Mergers and acquisitions in the electronic design automation industry

  • $1.14 billion was Cadence’s aggregate net purchase consideration for BETA CAE after cash acquired.[18]
  • 60% of Cadence’s BETA CAE acquisition consideration was scheduled to be paid in cash.[14]
  • 12 cents was the expected 2024 non-GAAP earnings-per-share dilution from Cadence’s BETA CAE acquisition.[19]
  • 12 companies had been acquired by Siemens for its EDA business by 2024, excluding the original Mentor Graphics transaction.[20]
  • $40 million was Cadence’s expected 2024 revenue contribution from BETA CAE.[14]
  • 40% of Cadence’s BETA CAE acquisition consideration was scheduled to be paid in Cadence stock.[14]

Strategic partnerships in the electronic design automation industry

  • 2 years was the period of Synopsys’ expanded partnership with NVIDIA announced in 2025.[21]
  • 4 high-speed connectivity and memory protocols—Ethernet, PCIe, CXL and HBM—were included in Siemens’ 2025 Alphawave Semi partnership.[22]
  • 3 domains—agentic AI, physics-based simulation and digital twins—were combined in Cadence’s expanded NVIDIA partnership in 2026.[14]
  • 5 TSMC technologies—N3, N2, A16, A14 and 3DFabric—were covered by Cadence’s expanded 2026 collaboration.[17]
  • 2 Intel Foundry nodes—Intel 16 and Intel 18A—were certified for Siemens’ Solido SPICE in 2024.[15]
  • 3 NVIDIA technologies—CUDA-X, NVIDIA NIM and NVIDIA NeMo Agent Toolkit—were named in the 2025 Synopsys partnership.[21]

07 Statistics

People & Workforce

Workforce depth tracks engineering-heavy delivery: 71,517 industry employees were reported in Q4 2025, and Cadence reported 13,850 full-time employees in 2025.

Hiring in the electronic design automation industry

  • 13,850 full-time employees and 90 part-time employees were reported globally by Cadence in its 2025 Corporate Impact Report.[14]
  • 12,700 employees worked at Cadence as of December 31, 2024, with a substantial majority in engineering roles.[13]
  • 87% of Synopsys employees were engineers at fiscal year-end 2024, and more than half of those engineers held master’s or doctoral degrees.[13]
  • 83% of NVIDIA employees were in technical roles in fiscal 2024, supporting the company’s electronic design automation and semiconductor design businesses.[13]
  • 99.4% of Cadence’s global workforce was full-time and 0.6% was part-time in the 2025 reporting period.[14]

Employee retention in the electronic design automation industry

  • 2.7% was Synopsys’ undesired turnover rate in fiscal 2023.[13]
  • 2.7% was NVIDIA’s overall employee turnover rate in fiscal 2024.[13]
  • 6% was Ansys’ annual employee turnover rate in 2024.[13]
  • 82 was Synopsys’ employee engagement score from its 2023 semi-annual SHAPE survey.[13]
  • 13,850 full-time employees were reported by Cadence in its 2025 Corporate Impact Report, providing the company’s workforce-retention base.[14]

Remote Work in the software and IT services sector (sector benchmark)

  • 34.8% of global software and IT services respondents worked remotely in 2026, according to the Stack Overflow Developer Survey.[23]
  • 6% of global respondents worked fully remotely in 2025, defined as spending less than one day per week in the office.[24]
  • 84% of technology-services employers agreed in 2025 that the ability to work remotely is important for employee retention.[24]
  • 48% of U.S. software and IT professionals surveyed worked remotely in 2026, compared with 21% in France.[23]
  • 10% of technology-services respondents worked under fully flexible arrangements in 2025, allowing employees substantial control over remote work.[24]

Hybrid Work in the software and IT services sector (sector benchmark)

  • 56% of IT employees worked in hybrid arrangements in 2025, while 31% were fully remote and 13% attended the office daily.[25]
  • 55% of technology-services respondents worked in a hybrid arrangement in 2025, the highest share among industries measured by Cisco.[24]
  • 52% of U.S. employees with remote-capable jobs worked in hybrid arrangements in May 2026, according to Gallup.[26]
  • 47% of global respondents worked in hybrid arrangements in 2025, down from 63% in Cisco’s 2022 study.[24]
  • 61% of U.S. employees with remote-capable jobs preferred hybrid work in November 2025, compared with 33% preferring fully remote work.[26]

Upskilling in the electronic design automation industry

  • 100% of Rambus employees were full-time as of December 31, 2024, within a workforce supported by formal and informal training opportunities.[13]
  • 2 new employee resource groups were created at Synopsys in fiscal 2024, bringing its total to 7 groups.[13]
  • 57% of Rambus’s 332 full-time employees were women in 2024, within a workforce offered professional development and leadership coaching.[13]
  • 7 employee resource groups operated at Synopsys after the two groups added in fiscal 2024.[13]
  • Over half of Synopsys engineers held master’s or doctoral degrees at fiscal year-end 2024, according to the company’s human-capital disclosure.[13]

Employee Engagement in the software and IT services sector (sector benchmark)

  • 37% of exclusively remote U.S. employees were engaged in May 2026, compared with 34% of hybrid employees and 29% of on-site employees with remote-capable jobs.[26]
  • 92% of employees ranked collaboration and community as very important aspects of office culture in Cisco’s 2025 global study.[24]
  • 22.2% of global software and IT respondents were happy with their current professional role in 2026, while 32.6% were unhappy.[23]
  • 74% of respondents approved of fully flexible hybrid policies in 2025, the highest positive sentiment among the policy types Cisco measured.[24]
  • 54% of exclusively remote U.S. employees were thriving in May 2026, compared with 52% of hybrid employees and 49% of on-site employees with remote-capable jobs.[26]

08 Statistics

Customer & Sales

Customer demand shows up in contracted visibility: Cadence had a record $7.8 billion backlog entering 2026, while Synopsys backlog recognition was expected within 12 months for 45% of awards.

Customer experience in the electronic design automation industry

  • $7.8 billion was Cadence’s record backlog entering 2026, representing contracted future customer work and product access.[13]
  • 44% of Cadence’s fiscal 2025 revenue came from customers in the United States, its largest reported geography.[13]
  • $7.054 billion was Synopsys’ total revenue from customer-facing engineering solutions in fiscal 2025, up 15% year over year globally.[13]
  • $756.6 million of Synopsys’ fiscal 2025 revenue came from Ansys products acquired during the year, expanding its customer offering from silicon to systems.[13]
  • 14% was Cadence’s global revenue growth in fiscal 2025, reflecting increased demand for AI-driven engineering products and customer deployments.[13]

Customer retention in the electronic design automation industry

  • No single Ansys customer accounted for more than 5% of revenue in 2024, limiting reported dependence on any individual renewing account.[13]
  • 26.1% of Ansys’ total revenue came through indirect sales channels in 2023, showing the prior-year contribution of channel-supported customer coverage.[13]
  • 45% of Synopsys’ backlog at October 31, 2025, excluding non-cancellable flexible spending commitments, was expected to be recognized as revenue within 12 months.[13]
  • No single Ansys customer accounted for more than 5% of revenue in 2023, according to the company’s annual filing.[13]
  • 23.9% of Ansys’ total revenue came through indirect sales channels in 2022, reflecting channel participation in customer support and expansion.[13]

Customer acquisition in the electronic design automation industry

  • 31% was Cadence’s fiscal 2025 revenue growth in Japan, its second-highest reported regional growth rate.[13]
  • $1.005 billion was Cadence’s fiscal 2025 revenue from customers in other Asian markets excluding China and Japan.[13]
  • $679.971 million was Cadence’s fiscal 2025 revenue from customers in China.[13]
  • $2.311 billion was Cadence’s fiscal 2025 revenue from customers in the United States, the company’s largest regional sales market.[13]
  • 81% was Cadence’s fiscal 2025 revenue growth in other Americas markets, its highest reported regional growth rate.[13]

Customer loyalty in the electronic design automation industry

  • $2.740 billion was Synopsys’ U.S. revenue in fiscal 2024, its largest reported geographic customer market before the Ansys merger.[13]
  • 12.6% of Synopsys’ consolidated revenue came from one customer in fiscal 2024, indicating a significant strategic account relationship.[13]
  • 12.8% of Synopsys’ consolidated revenue came from one customer in fiscal 2022, according to the company’s annual filing.[13]
  • $989.524 million was Synopsys’ China revenue in fiscal 2024, making China its second-largest reported geographic market.[13]
  • $625.502 million was Synopsys’ Korea revenue in fiscal 2023, indicating a sizeable customer base in the Korean semiconductor market.[13]

Lead generation in the electronic design automation industry

  • $4.822 billion was Cadence’s product and maintenance revenue in fiscal 2025, representing the company’s principal customer sales stream.[13]
  • $1.400 billion was Synopsys’ upfront products revenue in fiscal 2023, reflecting customer demand for non-time-based product purchases.[13]
  • $3.016 billion was Synopsys’ time-based products revenue in fiscal 2023, showing the scale of recurring customer contracts before the Ansys merger.[13]
  • $1.802 billion was Synopsys’ upfront products revenue in fiscal 2024, representing customer purchases recognized at the point of sale or delivery.[13]
  • $1.554 billion was Synopsys’ maintenance and service revenue in fiscal 2025, reflecting post-sale customer engagement and expansion activity.[13]

09 Statistics

Marketing & Brand

Technical visibility and conference throughput remains a data point, with 5,059 total attendee registrations reported for DAC 2026.

Marketing in the electronic design automation industry

  • $802.6 million was Cadence’s marketing and sales expense in fiscal 2025, compared with $757.5 million in 2024.[27]
  • $17.0 million was Cadence’s total advertising expense, including marketing programs and events, in fiscal 2022.[27]
  • $10.9 million was the increase in Cadence stock-based compensation included in marketing and sales expense from 2023 to 2024.[14]
  • $23.2 million was Cadence’s total advertising expense, including marketing programs and events, in fiscal 2024.[27]
  • $757.5 million was Cadence’s marketing and sales expense in fiscal 2024, 10% more than the $690.3 million recorded in 2023.[14]

Digital marketing in the electronic design automation industry

  • $694.995 million was Cadence’s marketing and sales expense for the reported 2025 period shown in its quarterly-results release.[28]
  • $200.4 million was Cadence’s marketing and sales expense in the fourth quarter of 2024.[28]
  • $215.0 million was Synopsys’ sales and marketing expense in the second quarter of fiscal 2025.[29]
  • $219.2 million was Synopsys’ sales and marketing expense in the fourth quarter of fiscal 2024.[29]
  • $180.4 million was Cadence’s marketing and sales expense in the fourth quarter of 2023.[28]

Branding in the electronic design automation industry

  • 18.3% was the reported growth in DAC 2025 abstract submissions compared with the prior year.[30]
  • 5,005 people attended DAC 2023, according to attendance metrics reported by the IEEE Council on Electronic Design Automation.[30]
  • 5,059 total attendee registrations were reported for DAC 2026, the EDA industry’s principal annual conference.[31]
  • 1,863 papers resulted from DAC 2025 abstract submissions, according to the conference report.[30]
  • 2,572 abstracts were submitted to DAC 2025, creating a large technical-content pipeline for EDA industry visibility.[30]

Influencer Marketing in the software and IT services sector (sector benchmark)

  • Across B2B companies, 58% of marketing teams reported using an always-on influencer marketing approach in the 2025 B2B Influencer Marketing Report.[32]
  • Across technology companies, 64% of marketers reported dedicated and growing budgets for creator or influencer marketing in 2026, according to Nielsen’s global marketing survey.[33]
  • Across B2B companies, 43% of marketers reported outstanding results from their influencer programs in the 2025 B2B Influencer Marketing Report.[32]
  • Across B2B companies, 55% of marketing organizations were using influencers in 2025, based on an Ipsos survey of 1,500 marketing leaders.[34]
  • Across technology companies, 27% of marketers reported dedicated but flat budgets for creator or influencer marketing in 2026, according to Nielsen’s global marketing survey.[33]

10 Statistics

Operations & Execution

Execution capacity is measured in segment economics: Synopsys Design Automation revenue was $5.3024 billion in fiscal 2025, and Cadence’s non-GAAP operating margin reached 44.6%.

Process optimization in the electronic design automation industry

  • $5.3024 billion was Synopsys’ Design Automation revenue in fiscal 2025, covering software and services used to optimize semiconductor design workflows worldwide.[13]
  • 2,500 Ansys employees worked in product development in 2024, supporting simulation and engineering optimization tools used by electronic-design customers worldwide.[13]
  • $766.3 million was Synopsys’ adjusted Design Automation operating income in the fourth quarter of fiscal 2025.[13]
  • $2.479 billion was Synopsys’ research-and-development expense in fiscal 2025, supporting software, verification and design-optimization development globally.[13]
  • $2.2135 billion was Synopsys’ adjusted operating income from Design Automation in fiscal 2025.[13]

Operational efficiency in the electronic design automation industry

  • $1.6235 billion was Synopsys’ cost of revenue in fiscal 2025.[13]
  • $4.882 billion was Synopsys’ gross margin in fiscal 2024.[13]
  • 44.6% was Cadence’s non-GAAP operating margin in fiscal 2025, reflecting operating efficiency across its global computational-software business.[13]
  • 45.8% was Cadence’s non-GAAP operating margin in the fourth quarter of 2025.[13]
  • $914.9 million was Synopsys’ operating income in fiscal 2025 after companywide operating costs.[13]

Quality management in the electronic design automation industry

  • More than half of Synopsys employees held master’s or PhD degrees at fiscal 2025 year-end.[13]
  • 13,800 employees worked at Cadence at December 31, 2025, with a substantial majority in engineering roles.[13]
  • 75% of Synopsys employees were engineers at fiscal 2025 year-end, supporting product quality, verification and customer engineering services worldwide.[13]
  • $2.082 billion was Synopsys’ research-and-development expense in fiscal 2024.[13]
  • $1.850 billion was Synopsys’ research-and-development expense in fiscal 2023.[13]

Supply chain in the electronic design automation industry

  • $4.822 billion was Cadence’s fiscal 2025 product-and-maintenance revenue, covering software and related support delivered to customers worldwide.[35]
  • $444.5 million was Synopsys’ maintenance-and-service cost of revenue in fiscal 2025.[13]
  • 1,263.9 million dollars was Ansys’ software-license revenue in 2024, representing delivered software products in its global distribution chain.[13]
  • 30 or more countries were home to Cadence employees in 2025.[14]
  • 4.44% was the weighted-average interest rate on Cadence’s senior notes issued in September 2024.[13]

Outsourcing / Offshoring in the software and IT services sector (sector benchmark)

  • Among German IT-service generalists, 10.2% of digital-experience services for customer projects were delivered offshore in 2024.[36]
  • Across European organizations, 35% planned to increase their use of nearshore outsourcing in the 2024/2025 sourcing study.[37]
  • Among German IT-service generalists, 19.5% of digital-experience services for customer projects were delivered nearshore in 2024.[36]
  • Across EU enterprises sourcing business functions internationally during 2021–2023, 28.7% moved information and communication technology services abroad.[5]
  • Across German digital-experience service providers, 7.6% of services for customer projects were delivered offshore in 2024.[36]

11 Statistics

Finance & Pricing

Recurring and usage models are visible in disclosed mix, including 91% of 2025 revenue in a usage-and-subscription model for the reported EDA software company.

Pricing strategy in the electronic design automation industry

  • $198.2 million was Ansys’ license revenue in calendar 2025, down from $295.7 million in 2024.[13]
  • $1.554 billion was Synopsys’ maintenance and service revenue in fiscal 2025, representing a recurring support and services component of its commercial model.[13]
  • 14% of Cadence’s fiscal 2025 revenue came from semiconductor IP, compared with 13% in fiscal 2024.[38]
  • 16% of Cadence’s fiscal 2025 revenue came from System Design and Analysis, unchanged from fiscal 2024.[38]
  • 91% of the 2025 revenue in the reported EDA software company’s usage-and-subscription model came from usage-based revenue, based on its disclosed $490.4 million usage-based revenue and $536.8 million total revenue.[13]

Cost reduction in the electronic design automation industry

  • $341.95 million was Ansys’ research-and-development expense in fiscal 2024, compared with $313.45 million in fiscal 2023.[13]
  • $311.9 million was Synopsys’ amortization of acquired intangible assets included in cost of revenue in fiscal 2025.[13]
  • $444.5 million was Synopsys’ maintenance-and-service cost of revenue in fiscal 2025, compared with $367.1 million in fiscal 2024.[13]
  • $867.2 million was Synopsys’ product cost of revenue in fiscal 2025, compared with $770.2 million in fiscal 2024.[13]
  • $4.917 million was Cadence’s restructuring and other related charges in fiscal 2024, compared with $31.297 million in fiscal 2023.[13]

Profitability in the electronic design automation industry

  • $336.9 million was Ansys’ income from operations in calendar 2025, compared with $395.5 million in 2024.[13]
  • 44.6% was Cadence’s non-GAAP operating margin in fiscal 2025, compared with 42.5% in fiscal 2024.[13]
  • $1.333 billion was Synopsys’ operating income in fiscal 2025, before the company’s reported net-income adjustments and other items.[13]
  • 32.2% was Cadence’s GAAP operating margin in the fourth quarter of fiscal 2025, compared with 33.7% in the fourth quarter of fiscal 2024.[13]
  • 39% was Synopsys’ adjusted operating margin for its Design Automation segment in fiscal 2024.[13]

Financial planning in the electronic design automation industry

  • $4.221 billion was Synopsys’ Design Automation revenue in fiscal 2024, compared with $3.775 billion in fiscal 2023.[13]
  • $6.260 billion to $6.340 billion was Cadence’s reported revenue outlook range for fiscal 2026 in the company’s 2026 planning guidance.[13]
  • $2.479 billion was Synopsys’ fiscal 2025 research-and-development budget, the company’s largest disclosed operating-expense category.[13]
  • $5.297 billion was Cadence’s fiscal 2025 revenue, compared with $4.641 billion in fiscal 2024.[13]
  • $1.012 billion was Cadence’s current portion of deferred revenue at September 30, 2026, compared with $778.4 million at December 31, 2025.[13]

12 Statistics

Product & Service

Category breadth spans design, verification and related services; Synopsys EDA revenue was $4,369.7 million in fiscal 2025.

Product development in the electronic design automation industry

  • $1,073.0 million was Synopsys’ EDA revenue in the fourth quarter of fiscal 2024.[1]
  • $1,007.7 million was Synopsys’ EDA revenue in the second quarter of fiscal 2024.[1]
  • $1,182.6 million was Synopsys’ EDA revenue in the third quarter of fiscal 2025.[1]
  • $4,369.7 million was Synopsys’ EDA revenue in fiscal 2025, covering digital and custom IC design software, verification products, manufacturing-related design products, FPGA software, AI-driven EDA and professional services.[1]
  • $149.6 million was Synopsys’ other product-group revenue in fiscal 2024, including university programs and other activities.[1]

Product lifecycle in the electronic design automation industry

  • $2,010.6 million was Synopsys’ upfront product revenue in fiscal 2025.[1]
  • $1,802.2 million was Synopsys’ upfront product revenue in fiscal 2024.[1]
  • $947.0 million was Synopsys’ fiscal-2025 revenue from Korea, representing 13% of total revenue.[1]
  • $814.3 million was Synopsys’ fiscal-2025 revenue from China, representing 12% of total revenue.[1]
  • $888.5 million was Synopsys’ fiscal-2025 revenue from Europe, representing 13% of total revenue.[1]

After-sales in the electronic design automation industry

  • $280.1 million was Synopsys’ maintenance-and-service revenue in the third quarter of fiscal 2024.[1]
  • $259.0 million was Synopsys’ maintenance-and-service revenue in the first quarter of fiscal 2025.[1]
  • $263.6 million was Synopsys’ maintenance-and-service revenue in the first quarter of fiscal 2024.[1]
  • $1,554.0 million was Synopsys’ maintenance-and-service revenue in fiscal 2025.[1]
  • 80% of Synopsys’ total revenue was recurring revenue in the first quarter of fiscal 2025.[1]

Value proposition in the electronic design automation industry

  • $15.2 billion was the global EDA market in 2024, according to EMIS and PwC analysis.[7]
  • $26.8 billion is the projected global EDA market for 2030, according to EMIS and PwC analysis.[7]
  • 70% was the global semiconductor-IP market share attributed to Cadence, Synopsys and Arm in OECD-cited analysis.[39]
  • 32% was Synopsys’ global EDA-vendor market share in 2024, according to IDC data cited by the European Council.[40]
  • More than 60% was the combined global EDA-market share attributed to Cadence, Synopsys and Arm in OECD-cited analysis.[39]

13 Statistics

Sustainability & Ethics

Sustainability reporting includes intensity metrics and operational reductions, such as Cadence 0.4 metric tons of CO2e per million dollars of revenue in 2024.

Sustainability in the electronic design automation industry

  • 90 megawatts was the capacity of Synopsys’s solar virtual power purchase agreement reported in 2024.[41]
  • 0.4 metric tons of CO2e per million dollars of revenue was Cadence’s 2024 Scope 1 and 2 emissions intensity.[14]
  • 60% was Siemens’ reduction in operational CO2e emissions from its 2019 baseline in fiscal 2024.[22]
  • 2.1 million square feet of Synopsys office space was green-certified in FY2025.[41]
  • 25,000 products received Siemens’ EcoTech label by fiscal 2024.[22]

ESG in the electronic design automation industry

  • 1.2 million dollars was Cadence’s charitable giving reported for 2024.[14]
  • 6.3 years was Cadence employees’ average tenure reported in 2025.[14]
  • 58% was Cadence’s reported headcount growth over the preceding five years in 2025.[14]
  • 2,000 universities had access to Synopsys technology in 2025.[41]
  • 1,748 employees were hired by Cadence in 2025.[14]

Ethics in the electronic design automation industry

  • 0.10 work-related injuries per 100 workers was Cadence’s reported rate in 2025.[14]
  • 12 languages were used for Synopsys’s 2024 Code of Ethics and Business Conduct training.[41]
  • 62% was Siemens’ Zero Trust coverage across relevant applications in fiscal 2025.[22]
  • 10 or more employees was the threshold for offices receiving Synopsys Integrity Helpline posters in 2024.[41]
  • 100% of Synopsys employees completed Ethics and Compliance Training in FY2025.[41]

CSR in the electronic design automation industry

  • 442 million euros was Siemens’ learning and continuing-education investment in fiscal 2024.[22]
  • 180,000 internal and external digital-learning offerings were available to Siemens workers in 2024.[22]
  • 29,000 schools received Synopsys CFD resources for STEM Racing in 2025.[41]
  • Approximately 2,000 charities and nonprofits were supported annually by Synopsys’s matching-gift program.[41]
  • 101,500 employee learning hours were reported by Synopsys in 2025.[41]

Circular economy in the electronic design automation industry

  • 100% is Siemens’ target coverage for Robust Eco Design across relevant hardware, software and services.[20]
  • 25,000-plus Siemens products carried the EcoTech label by fiscal 2024, supporting resource efficiency and circularity.[22]
  • 50% was Siemens’ fiscal-2025 interim target for reducing waste to landfill from the fiscal-2021 baseline.[22]
  • 67% of the relevant Siemens portfolio was covered by Robust Eco Design in fiscal 2025.[22]
  • 55% was Siemens’ conservation-program implementation rate at relevant locations in fiscal 2025.[22]

Carbon footprint in the electronic design automation industry

  • 10,085 metric tons CO2e came from Synopsys colocated data centers in FY2024.[41]
  • 82,467 metric tons CO2e came from Synopsys purchased goods and services in FY2024.[41]
  • 248,675 metric tons CO2e was Synopsys’s total reported emissions in FY2024.[41]
  • 2,273 metric tons CO2e was Synopsys’s Scope 1 emissions in FY2024.[41]
  • 14,994 metric tons CO2e came from Synopsys employee commuting in FY2024.[41]

15 Statistics

Globalization & Expansion

Regional procurement signals ongoing shifts, with APAC electronic system design procurement reaching $2,223.0 million in Q3 2025 and Q4 2025 growth remaining uneven.

Globalization in the electronic design automation industry

  • 10.3% was the electronic system design industry's year-over-year revenue growth in Q4 2025.[2]
  • 13.9% was the Americas' year-over-year electronic system design revenue growth in Q4 2025.[2]
  • 9.8% was EMEA's year-over-year electronic system design revenue growth in Q4 2025.[2]
  • $5,466.3 million was the electronic system design industry's global revenue in Q4 2025.[2]
  • 11.3% was Asia-Pacific's year-over-year electronic system design revenue growth in Q4 2025.[2]

Cultural adaptation in the electronic design automation industry

  • 14% was Cadence's fiscal 2025 revenue growth in total revenue.[38]
  • $1,005.2 million was Cadence revenue from other Asia in fiscal 2025.[38]
  • $790.6 million was Cadence revenue from Europe, the Middle East and Africa in fiscal 2025.[38]
  • 75% of Synopsys employees were engineers at fiscal 2025 year-end.[13]
  • $168.3 million was Cadence revenue from other Americas in fiscal 2025.[38]

Supplier management in the electronic design automation industry

  • 1 Intel Foundry Alliance membership was held by Synopsys for optimized EDA tools, IP and design services in 2025.[21]
  • 4 interface and memory IP families were identified by Synopsys for Samsung's SF2P and SF4X processes: 224G, UCIe, MIPI and LPDDR6.[29]
  • 14A was the Intel Foundry process covered by Cadence's new multi-year collaboration announced in June 2026.[14]
  • 2nm was the Samsung Foundry process used for Synopsys's successful HBM3 customer tape-out announced in 2025.[29]
  • 1 expanded Samsung Foundry collaboration was announced by Siemens Digital Industries Software in 2025, extending certification across its EDA portfolio.[15]

Stakeholder management in the electronic design automation industry

  • 10% was the threshold below which no single customer represented Cadence's total receivables at December 31, 2025.[13]
  • 4 stakeholder groups were named by Synopsys as beneficiaries of its people strategy: stockholders, customers, employees and the wider company.[13]
  • 1 annual employee-engagement survey program was reported by Cadence for measuring workforce engagement and feedback.[13]
  • 13,800 employees was Cadence's global workforce at December 31, 2025.[13]
  • 75% of Siemens AG revenue was generated in Europe, CIS, Africa and the Middle East in fiscal 2025.[46]

Distribution channels in the electronic design automation industry

  • 76% of Cadence revenue was recognized over time in fiscal 2025.[13]
  • 20% of Cadence revenue was classified as up-front revenue in fiscal 2025.[13]
  • 70% of Cadence revenue came from core EDA products in fiscal 2025.[38]
  • 80% of Cadence revenue was classified as recurring revenue in fiscal 2025.[13]
  • 4 million square feet was Synopsys's leased space across 35 countries outside the United States in fiscal 2025.[13]

Key questions about the electronic design automation industry

What is the current size of the electronic design automation market?
The global EDA market was valued at $15.2 billion in 2024.
How fast is the EDA market expected to grow?
PwC forecasts the global EDA market to reach $26.8 billion by 2030, implying a 9.9% CAGR from 2024 to 2030.
Which companies lead the electronic design automation industry?
Cadence Design Systems and Synopsys are tied at the top of Gitnux's 2026 electronic design automation ranking with an Overall score of 9.6 each.
What technology shifts are changing EDA investment and adoption?
Growth is being driven by AI-related chip demand, hyperscaler adoption and increasing design complexity. In 2024, 75% of digital leaders globally planned to increase AI-related business expenditure.
How concentrated is the EDA market structure?
The industry remains highly concentrated: Synopsys, Cadence and Siemens control more than 88% of the global market in 2024.
What market areas show uneven demand across the design flow?
In Q4 2025, semiconductor IP revenue grew 18.3% year over year while IC physical design and verification declined 2.6%.
Reference

Cite This Report

This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.

APA
Samuel Norberg. (2026, November 10). Electronic Design Automation Industry Statistics. Gitnux. https://gitnux.org/electronic-design-automation-industry-statistics
MLA
Samuel Norberg. "Electronic Design Automation Industry Statistics." Gitnux, 10 Nov 2026, https://gitnux.org/electronic-design-automation-industry-statistics.
Chicago
Samuel Norberg. 2026. "Electronic Design Automation Industry Statistics." Gitnux. https://gitnux.org/electronic-design-automation-industry-statistics.

Sources & references

55 sources cited across this report

  1. s201.q4cdn.com
  2. semi.org
  3. teksystems.com
  4. higherlogicdownload.s3.amazonaws.com
  5. ec.europa.eu
  6. oecd.org
  7. pwc.com
  8. riverbed.com
  9. anomalo.com
  10. kpmg.com
  11. informatica.com
  12. utah.ismworld.org
  13. sec.gov
  14. cadence.com
  15. news.siemens.com
  16. keysight.com
  17. newsroom.cadence.com
  18. d18rn0p25nwr6d.cloudfront.net
  19. cadencenextgen.q4web.com
  20. siemens.com
  21. news.synopsys.com
  22. press.siemens.com
  23. survey.stackoverflow.co
  24. newsroom.cisco.com
  25. computerworld.com
  26. gallup.com
  27. secinfo.com
  28. investor.cadence.com
  29. investor.synopsys.com
  30. ieee-ceda.org
  31. dac.com
  32. toprankmarketing.com
  33. brand-news.it
  34. business.linkedin.com
  35. stocktitan.net
  36. luenendonk.de
  37. whitelane.com
  38. publicnow.com
  39. one.oecd.org
  40. eur-lex.europa.eu
  41. synopsys.com
  42. gtia.org
  43. isc2.org
  44. cdn.sypher.eu
  45. pagerduty.com
  46. assets.new.siemens.com
  47. grandviewresearch.com
  48. bis.gov
  49. investor.keysight.com
  50. financialfilings.com
  51. agnisys.com
  52. aldec.com
  53. investors.silvaco.com
  54. sigasi.com
  55. s206.q4cdn.com