01 Industry overview
The spray foam industry at a glance
The global spray polyurethane foam market was valued at $3.06 billion in 2025, the latest available market-size estimate, and is forecast to grow steadily through 2034.
- $3.06B[3]
- Global market size, 2025
- 6.60%[3]
- Forecast CAGR, 2026–2034
- 42.0%[3]
- Asia-Pacific share, 2025
- $22M+[20]
- IBP acquisition revenue, 2026
- Market size
- The global polyurethane spray foam market was valued at $3.06 billion in 2025. A separate 2026 estimate puts the broader spray foam insulation market at $2.43 billion in 2025, reflecting differences in market scope and methodology.[3][6]
- Forecast & CAGR
- Fortune Business Insights forecasts the global polyurethane spray foam market to reach $5.45 billion by 2034, implying a 6.60% CAGR from 2026 to 2034. The Business Research Company forecasts the spray foam insulation market to reach $3.32 billion by 2030 at a 6.4% CAGR.[3][6]
- Market share & regions
- Asia-Pacific accounted for 42.0% of the global polyurethane spray foam market in 2025. In an alternative market estimate, North America was the largest regional market for spray foam insulation in 2025; the different conclusions reflect differing market definitions.[3][6]
- Segmentation
- The market is commonly segmented by open-cell and closed-cell foam, application such as insulation, roofing and sealants, and end-use industries including building and construction, manufacturing, agriculture and marine. Product segmentation also distinguishes two-component high-pressure systems, two-component low-pressure systems and one-component foam.[21][22]
- Key players & concentration
- California’s 2025 regulatory review identified 13 spray polyurethane foam system manufacturers, including BASF, Carlisle Spray Foam Insulation, DuPont, Huntsman Building Solutions, Johns Manville and Holcim Solutions and Products. The list indicates a concentrated group of major system suppliers, although no public global market-share ranking was identified.[19]
- Pricing
- Published U.S. consumer pricing data indicates installed spray foam insulation generally costs about $1.00–$4.50 per square foot in 2026, with project complexity and foam type driving the range. These are installation-price benchmarks rather than manufacturer product prices.[23]
- Trends, drivers & challenges
- Demand is supported by construction activity, energy-efficiency requirements and the use of spray foam for insulation, air sealing and moisture control. The industry is also transitioning from high-GWP HFC blowing agents to lower-GWP HFO systems in the United States, while manufacturers face formulation, application and compliance challenges during the transition.[6][24][17]
- Consumer behavior & competition
- Reliable public statistics on spray-foam customer conversion, contractor selection and brand-level competition were not identified. Available market research indicates competition is organized around foam type, application, end-use industry, regional coverage and product sustainability claims.
- M&A
- M&A remains active among installers and system suppliers. Installed Building Products announced in February 2026 that acquisitions including Biomax Spray Foam added approximately $22 million of annual revenue, while TopBuild reported a February 2026 acquisition of Applied Coatings and Upstate Spray Foam with combined annual revenue of about $20 million.[20][25]
- Regulation
- U.S. EPA restrictions require polyurethane foam products using restricted high-GWP HFCs to meet a 150-GWP limit beginning January 1, 2025, with restrictions covering manufacture and import. Industry guidance states that HFC closed-cell SPF systems manufactured before January 1, 2025 may generally be sold and applied until January 1, 2028, subject to applicable rules.[17][24]
- Latest news
- IAL Consultants released its ninth global SPF and one-component foam market study in August 2026, covering 2021–2025 historical data and forecasts for 2026–2030. In December 2025, BASF launched WALLTITE RSB, a closed-cell SPF product using recycled and renewable raw materials to reduce product carbon footprint.[26][27]
02 Ranking
Top 10 Companies in the Spray Foam Industry
The leading companies in the spray foam industry, ranked on market impact, performance, momentum, innovation and brand popularity.
Updated November 21, 2026 · Next review December 21, 2026
Holcim stands out for SPF brand integration because its Enverge combines Gaco SprayFoam and SES Foam brands, while Sika focuses on two-component sprayed polyurethane insulation for roofs and buildings since it sells those products to that application scope.
Ranked by Overall score · How we score ↓
Editor's top 3 picks
Where to start, by need.
#1 Overall · Leader in spray foam insulation systems
Holcim
CH
Ranked #1 · 8.9 · Spray foam insulation systems
Why we picked it: Holcim’s Enverge unifies Gaco and SES SPF brands, and it reported 16.2% operating margin alongside a -2.9% revenue growth.
#2 overall
Sika
CH
Ranked #2 · 8.7 · Spray foam insulation systems
Why we picked it: Sika sells two-component SPF systems for roofs and buildings, and it reported 13.3% operating margin with -4.8% revenue growth.
Leader in spray polyurethane foam chemicals
BASF
DE
Ranked #5 · 8.5 · Spray polyurethane foam chemicals
Why we picked it: BASF is identified as a leading global spray polyurethane foam producer with -2.9% revenue growth and 2.7% operating margin.
Pick 1 is the #1 company overall. Pick 2 is the highest-ranked company in the top 5 that adds a new segment; no further segment places in the top 5, so pick 3 follows rank.
Full ranking
| # | Company | Overall ↓ | Impact | Performance | Momentum | Innovation | Company snapshot |
|---|---|---|---|---|---|---|---|
| 1 | Holcim Spray foam insulation systems · CH | 8.9 | 9.3 | 8.0 | 8.6 | 9.9 | |
Company snapshot · Holcim · Data as of November 21, 2026 Holcim’s Enverge combines the Gaco SprayFoam and SES Foam brands.[28]
| |||||||
| 2 | Sika Spray foam insulation systems · CH | 8.7 | 9.1 | 7.8 | 8.0 | 9.9 | |
Company snapshot · Sika · Data as of November 21, 2026 Sika sells two-component sprayed polyurethane insulation products for roofs and buildings.[29]
| |||||||
| 3 | Saint-Gobain Spray foam insulation systems · FR | 8.7 | 7.9 | 8.1 | 9.4 | 9.9 | |
Company snapshot · Saint-Gobain · Data as of November 21, 2026 Saint-Gobain is recognized as a global spray polyurethane foam participant.[5]
| |||||||
| 4 | ICP Group Spray foam insulation systems · US | 8.6 | 7.0 | 9.9 | 9.9 | 8.5 | |
Company snapshot · ICP Group · Data as of November 21, 2026 ICP Group manufactures polyurethane spray foam and sealants through its building-solutions group.[30]
| |||||||
| 5 | BASF Spray polyurethane foam chemicals · DE | 8.5 | 9.9 | 7.4 | 7.5 | 8.5 | |
Company snapshot · BASF · Data as of November 21, 2026 BASF is identified as a leading global spray polyurethane foam producer.[16]
| |||||||
| 6 | SOPREMA Roofing and spray polyurethane foam systems · FR | 8.5 | 7.9 | 7.9 | 8.8 | 9.9 | |
Company snapshot · SOPREMA · Data as of November 21, 2026 SOPREMA is identified as a spray polyurethane foam market participant.[31]
| |||||||
| 7 | Rhino Linings Spray foam, coatings and protective systems · US | 8.2 | 7.0 | 8.7 | 9.0 | 9.2 | |
Company snapshot · Rhino Linings · Data as of November 21, 2026 Rhino Linings is listed as a current SPF systems manufacturer.[19]
| |||||||
| 8 | Carlisle Companies Integrated roofing and spray foam systems · US | 8.2 | 8.1 | 8.2 | 8.8 | 7.7 | |
Company snapshot · Carlisle Companies · Data as of November 21, 2026 Carlisle Spray Foam Insulation is a major SPF systems manufacturer.[19]
| |||||||
| 9 | NCFI Polyurethanes Residential, commercial and roofing SPF systems · US | 8.0 | 7.0 | 8.4 | 8.6 | 8.5 | |
Company snapshot · NCFI Polyurethanes · Data as of November 21, 2026 NCFI manufactures closed-cell, open-cell and roofing spray polyurethane foam systems.[32]
| |||||||
| 10 | Dow Polyurethane chemicals and spray foam systems · US | 8.0 | 9.6 | 7.1 | 7.1 | 7.0 | |
Company snapshot · Dow · Data as of November 21, 2026 Dow is listed among the largest global spray polyurethane foam participants.[5]
| |||||||
How we score
- Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
- Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
- Momentum (20%): growth trajectory and future potential.
- Innovation (15%): R&D intensity and how technologically advanced the company is.
Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.
Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.
Cadence Recalculated when new figures are published; next review December 21, 2026.
Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.
Cite this ranking
APA
Samuel Norberg. (2026, November 21). Top 10 companies in the spray foam industry. In Spray Foam Industry Statistics. Gitnux. https://gitnux.org/spray-foam-industry-statistics/#top-companies
Global spray foam production by region
NAFTA holds the largest share at 320K tonnes.
03 Trends & forecasts
Top 10 Spray Foam Industry Trends & Forecasts 2027
What is changing in the spray foam industry, with the evidence behind each trend and a forecast for 2027.
Forecasts were generated by an AI model from the cited evidence. They are estimates, not guarantees.
01Global market growth remains steady
High confidenceThe global polyurethane spray foam market was valued at $3.06 billion in 2025 and is projected to reach $5.45 billion by 2034, implying a 6.60% CAGR from 2026 to 2034. Asia-Pacific accounted for 42.0% of the 2025 market. [Source: Fortune Business Insights; sourceUrl: https://www.fortunebusinessinsights.com/polyurethane-spray-foam-market-113902][3]
Forecast 2027: The market should continue expanding in 2027 at roughly the mid-6% annual rate, supported by construction, renovation and energy-efficiency applications. Asia-Pacific is likely to remain the largest regional demand center.
02Construction remains the primary demand engine
High confidenceMarket research identifies construction as the leading application driver for polyurethane spray foam, which is used for thermal insulation, air sealing, moisture control and envelope performance. The same market forecast describes rising demand for energy-efficient and sustainable construction materials. [Source: Fortune Business Insights; sourceUrl: https://www.fortunebusinessinsights.com/polyurethane-spray-foam-market-113902][3]
Forecast 2027: In 2027, building and construction should remain the dominant end use, with demand strongest in new housing, commercial buildings and retrofit work where air sealing and moisture management add value beyond conventional insulation.
03Asia-Pacific retains regional leadership
High confidenceAsia-Pacific held a 42.0% share of the global polyurethane spray foam market in 2025, equivalent to approximately $1.27 billion under the cited market definition. [Source: Fortune Business Insights; sourceUrl: https://www.fortunebusinessinsights.com/polyurethane-spray-foam-market-113902][3]
Forecast 2027: Asia-Pacific is likely to remain the largest regional market in 2027 as urban construction, industrial development and demand for higher-performing building envelopes support consumption. Growth should be especially visible in developing construction markets.
04Low-GWP blowing agents replace HFCs
High confidenceU.S. EPA restrictions set a global-warming-potential limit of 150 for covered polyurethane foam products manufactured or imported from January 1, 2025. The regulatory transition is pushing suppliers toward HFO and other lower-GWP systems. [Source: U.S. EPA; sourceUrl: https://www.epa.gov/hfcs/technology-transitions-hfc-restrictions-sector][17]
Forecast 2027: By 2027, HFO-based systems should be the commercial default for most new U.S. closed-cell SPF supply, while remaining HFC inventory and application exceptions will represent a shrinking portion of the market.
05Regulatory compliance becomes a buying criterion
High confidenceEPA requires labeling for covered foam products using HFCs or HFC blends, including identification of HFC content and, where applicable, a statement that the product has a GWP below 150. [Source: U.S. EPA; sourceUrl: https://www.epa.gov/hfcs/frequent-questions-phasedown-hydrofluorocarbons][17]
Forecast 2027: In 2027, contractors and distributors should place greater emphasis on documented GWP status, labeling and product-manufacture dates when selecting systems. Compliance documentation will increasingly differentiate suppliers in commercial projects.
06Sustainable formulations move into mainstream products
High confidenceBASF launched WALLTITE RSB in December 2025 as a closed-cell SPF incorporating recycled and renewable raw materials. BASF documentation states that the product contains 20% combined renewable and recycled content by volume. [Source: BASF; sourceUrl: https://www.basf.com/us/en/media/news-releases/2025/12/P-US-25-49][27][33]
Forecast 2027: In 2027, recycled, renewable and mass-balance content should become more common in premium SPF offerings, especially where projects pursue LEED, embodied-carbon reporting or public-sector low-carbon requirements.
07HFO systems gain sustainability advantages
High confidenceBASF’s WALLTITE RSB sustainability documentation identifies an HFO blowing agent with GWP below 1 and reports 20% combined renewable and recycled content by volume. [Source: BASF; sourceUrl: https://spf-assets.basf.com/assets/files/brochures/WALLTITE-RSB-Sustainability-Sheet.pdf?v=1773921836][33]
Forecast 2027: In 2027, HFO chemistry should compete on both regulatory compliance and environmental product declarations rather than solely on thermal performance. Suppliers able to verify lower embodied carbon should gain specification advantages.
08Open-cell foam remains a major product segment
Medium confidenceOpen-cell SPF was identified as the leading cell-structure segment in 2025 in the cited global market study, while the industry continues to distinguish open-cell and closed-cell systems by performance and application. [Source: Fortune Business Insights; sourceUrl: https://www.fortunebusinessinsights.com/polyurethane-spray-foam-market-113902][3]
Forecast 2027: Open-cell foam should remain important in 2027 for cost-sensitive residential and interior applications, while closed-cell foam should retain stronger positions where water resistance, structural contribution or higher R-value per inch is required.
09Closed-cell foam stays strong in specialty uses
Medium confidenceClosed-cell SPF is used where higher thermal performance, moisture resistance and durability are required. BASF’s 2025 WALLTITE RSB launch specifically expanded its closed-cell SPF portfolio for residential and commercial construction. [Source: BASF; sourceUrl: https://sprayfoam.basf.com/us/en/products/WALLTITE/WALLTITE-RSB][34]
Forecast 2027: In 2027, closed-cell systems should continue to command premium positioning in roofing, below-grade, commercial envelope and other moisture-sensitive applications, even as open-cell foam retains volume in interior work.
10Installer consolidation continues
High confidenceInstalled Building Products reported that its February 2026 acquisitions, including Biomax Spray Foam Insulation, added more than $22 million of annual revenue; Biomax contributed approximately $5 million and installs spray foam and fiberglass across four U.S. states. [Source: Installed Building Products; sourceUrl: https://investors.installedbuildingproducts.com/node/12901/pdf][20]
Forecast 2027: The 2027 installation market should see continued acquisition of small and regional contractors by national platforms seeking geographic coverage, purchasing scale and access to skilled crews. Fragmented local supply will remain available for consolidation.
04 Statistics
Technology
Patent activity continues to concentrate on building-envelope insulation and system chemistry, with 31 records in 2024 versus 47 in 2021.
R&D, patents and design rights in the spray foam industry
- 1 U.S. patent application was published in 2024 for a low-pressure plural-component spray system producing polyurethane spray-foam insulation; the application lists IPC classes B05B 7/04, B05B 12/00, C08J 9/12 and E04B 1/76.[1]
- 31 patent records were published in 2024 for spray polyurethane foam building-envelope insulation, compared with 47 in 2021, a 34% decline in the last complete comparison window.[2]
- 932 published patent records matched spray polyurethane foam building-envelope insulation applications filed from 2015 through August 2026, including formulation chemistry, application equipment and structural integration; IPC/CPC classifications were used by the dataset.[2]
05 Statistics
Market Intelligence
Industry sizing stays anchored around the 2025 polyurethane spray foam value of $3.06B and an outlook to $5.45B by 2034 at a 6.60% CAGR.
Market size, volume and shipments in the spray foam industry
- USD 2.7 billion was the 2025 global spray foam market, covering open-cell and closed-cell products by density and application.[3]
- USD 2.68 billion was the 2025 global polyurethane spray foam market, covering closed-cell and open-cell products across insulation, roofing, packaging and automotive applications.[4]
- USD 3.1 billion was the 2025 global spray foam market, covering spray foam products used in building-envelope, roofing, crawl-space and retrofit applications.[5]
- USD 3.06 billion was the 2025 global polyurethane spray foam market, covering open- and closed-cell products across construction, automotive and other applications.[3]
Forecast growth and shipments in the spray foam industry
- The global spray foam market is projected to reach USD 5.3 billion by 2035, expanding at a 5.7% CAGR over 2026–2035; the report was published in 2026.[5]
- The global spray foam market is projected to reach USD 4.79 billion by 2034 from USD 2.87 billion in 2026, a 6.59% CAGR over 2026–2034; the report was published in 2026.[3]
- The global polyurethane spray foam market is projected to reach USD 5.45 billion by 2034 from USD 3.24 billion in 2026, a 6.60% CAGR over 2026–2034; the report was published in 2026.[3]
- The global spray foam market is projected to reach USD 4.37 billion by 2030 from USD 3.38 billion in 2026, at a 7.0% CAGR over 2026–2030; the report was published in 2026.[6]
06 Statistics
Strategy & Growth
Capacity additions target throughput and manufacturing expansion, including NCFI’s 140,000-square-foot plant and Foam Systems’ 1,000 drums per day additional output capacity.
Capacity expansion in the spray foam industry
- 140,000 square feet was the announced size of NCFI Polyurethanes’ new spray-polyurethane-foam manufacturing plant in Mount Airy, North Carolina, with construction beginning in 2025.[7]
- More than $50 million was announced for a new 140,000-square-foot NCFI Polyurethanes manufacturing facility in Mount Airy, North Carolina, expanding U.S. spray-polyurethane-foam production capacity in 2025.[7]
- 1,000 drums per day of additional output capacity was announced when Foam Systems opened a fully automated polyurethane manufacturing facility in Mandeville, Louisiana, in 2024.[8]
07 Statistics
Product & Standards
Specified performance thresholds appear consistently across ASTM and regional requirements, including 90% minimum closed-cell content and 3.0 perm-inches maximum water-vapor-permeability for open-cell.
Standards, grades and specs for spray foam
- 90% is the minimum closed-cell content specified for the spray-foam products covered by ASTM C1029 and ASTM D7425 in the cited EPD.[9]
- 3.0 perm-inches is the maximum water-vapor-permeability requirement reported for open-cell spray polyurethane foam under ASTM C1029 and D7425.[9]
- 32.0 kg/m³ is the minimum core density for closed-cell medium-density spray polyurethane foam in the cited Canadian specification.[10]
- 24 hours is the specified minimum time to occupancy after installation of the closed-cell medium-density spray polyurethane foam system under the cited Canadian specification.[10]
- R6.2 per inch is the minimum thermal resistance for open-cell spray polyurethane foam under ASTM C1029; the EPD cites ASTM C1029 and D7425 requirements, revised test methods through 2024.[9]
08 Statistics
People & Workforce
Workforce constraints persist, with 47% of surveyed New York contractors reporting difficulty filling insulation and building-shell roles in 2023.
Employment and hiring in the spray foam industry
- More than 10,000 spray foam industry jobs were located in Texas in 2024, the largest state total reported by the study.[11]
- Nearly 55,000 people were employed by the U.S. spray foam industry across all 50 states in 2024, according to a study of spray-foam market dynamics.[11]
- 47% of surveyed New York contractors reported difficulty filling insulation, building-shell or envelope-installer positions in 2023; this is a broader installation-workforce proxy containing spray-foam installers.[12]
09 Statistics
Customers & Channel
Channel mix remains installer-heavy, with 75% of residential sales going to installers and 25% to certified distributors in 2021.
Distribution channels for spray foam
- 75% of U.S. spray-foam manufacturers’ residential sales went to installers and 25% to certified distributors in the 2021 supply-chain interviews; channel scope is spray-foam insulation manufacturers.[13]
- 8.7% of global spray-foam market revenue came through online and e-commerce channels in 2025, with the channel projected to grow at an 18.3% CAGR through 2034.[14]
- 58% of global spray-foam market revenue was attributed to direct distribution and 42% to indirect distribution in 2025; the report defines indirect channels as distributors, building-material outlets and kit-oriented retail.[5]
Demand by end use for spray foam
- Commercial construction represented 30.56% of the global closed-cell spray-foam market by value in 2025, equal to USD 412.02 million; the category excludes open-cell spray foam.[15]
- Residential construction represented 56.55% of the global closed-cell spray-foam market by value in 2025, equal to USD 762.37 million; the category excludes open-cell spray foam.[15]
- Residential buildings accounted for 49.62% of global spray-polyurethane-foam market value in 2025, according to a market study separating end-use industries from application categories.[16]
10 Statistics
Regulation & Risk
U.S. and EU restrictions tighten compliance timelines, including a 150 GWP limit from January 1, 2025 and a prohibited sale window three years after then.
Regulations and compliance for spray foam
- 3 years after January 1, 2025, sale, distribution and export of U.S.-manufactured or imported polyurethane foam products using restricted HFCs become prohibited under EPA’s AIM Act rules.[17]
- 0.1% by weight is the European Union REACH threshold below which diisocyanate concentration avoids the industrial and professional use restriction; otherwise users require documented safety training.[18]
- 5 years is the maximum interval before European Union training on safe diisocyanate use must be renewed for industrial and professional users of polyurethane spray foam mixtures.[18]
- 150 GWP is the maximum permitted for polyurethane foam products manufactured or imported in the United States from January 1, 2025, under EPA’s Technology Transitions rules.[17]
- $0.02 per pound of product sold in California is the funding rate beginning October 1, 2026, for regulated spray polyurethane foam systems containing unreacted MDI.[19]
Key questions about the spray foam industry
What was the spray foam market size in 2025?
How fast is the market growing after 2025?
Which companies lead the spray foam industry?
What technology shift is shaping SPF formulations?
How is the market structured by product and channels?
What compliance constraint affects U.S. polyurethane foam products?
Cite This Report
This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.
Samuel Norberg. (2026, November 21). Spray Foam Industry Statistics. Gitnux. https://gitnux.org/spray-foam-industry-statistics
Samuel Norberg. "Spray Foam Industry Statistics." Gitnux, 21 Nov 2026, https://gitnux.org/spray-foam-industry-statistics.
Samuel Norberg. 2026. "Spray Foam Industry Statistics." Gitnux. https://gitnux.org/spray-foam-industry-statistics.
Sources & references
34 sources cited across this report
patents.justia.com
patsnap.com
fortunebusinessinsights.com
exactitudeconsultancy.com
gminsights.com
thebusinessresearchcompany.com
- sprayfoammagazine.com
prweb.com
astm.org
- genyk.com
- theibe.org
nyserda.ny.gov
bpa.gov
dataintelo.com
pmarketresearch.com
mordorintelligence.com
epa.gov
eur-lex.europa.eu
dtsc.ca.gov
investors.installedbuildingproducts.com
theinsightpartners.com
heimdallinsights.com
thisoldhouse.com
sprayfoam.org
sec.gov
- news.ialconsultants.com
basf.com
holcim.com
grc.sika.com
icpgroup.com
researchandmarkets.com
- ncfi.com
spf-assets.basf.com
sprayfoam.basf.com
