Gitnux/Report 2026

Passive Radiative Cooling Industry Statistics

The passive radiative cooling materials market is estimated at $1.5–2.5 billion in 2026, explore the growth range, company coverage and commercialization trends.
14Statistics
31Sources
2Sections
14mRead
How this report is researched
01Editorial Scope

Before any source is gathered, an editor locks the question, what qualifies, and how the piece will be judged.

02Source Research

Search agents collect the source set and pull each data point out with its provenance attached.

Read our full methodology →

Search agents attach provenance to every extracted figure.

Next review: within 28 days

01 Industry overview

The passive radiative cooling industry at a glance

Passive radiative cooling materials are moving from laboratory demonstrations toward commercial deployment, with the market estimated at $1.5–2.5 billion in 2026 and projected to reach $15–22 billion by 2036.

$1.5–2.5B[9]
Market size, 2026
24–27%[9]
Forecast CAGR, 2026–2036
37.93%[10]
Asia-Pacific share, 2025
11–27%[11]
Peak cooling-demand reduction
Market size
The passive radiative cooling materials market was estimated at $1.5–2.5 billion in 2026 by Meticulous Research, covering coatings, films, membranes, glazing and textiles sold as passive cooling products. A narrower QYResearch estimate put the 2025 market at $50.77 million, illustrating the substantial difference created by market definitions.[9][5]
Forecast & CAGR
Meticulous Research forecasts growth from $1.5–2.5 billion in 2026 to $15–22 billion in 2036, equivalent to an indicative CAGR of 24–27%. For a narrower materials definition, QYResearch forecasts growth from $50.77 million in 2025 to $371.15 million in 2032, a 2026–2032 CAGR of approximately 26.76%.[9][5]
Market share & regions
Asia-Pacific accounted for an estimated 37.93% of the global passive daytime radiative cooling market in 2025, valued at $286.71 million. North America represented 25.92%, Europe 19.92%, the Middle East and Africa 11.29%, and Latin America 4.94%.[10]
Segmentation
Products are segmented into coatings and paints, films, membranes, glazing, panels and textiles. Applications include buildings and construction, telecommunications, electronics, cold-chain logistics, vehicles, industrial equipment, infrastructure, agriculture and outdoor fabrics.[9][5]
Key players & concentration
The market remains fragmented between specialist technology companies and larger coating, construction-material and functional-film producers. QYResearch reports that the sector is shifting from a technology-demonstration model toward an engineering-procurement model as larger industrial companies enter after 2025, but no reliable public source identified a global concentration ratio.[5]
Pricing
The World Economic Forum identifies upfront costs and typical two- to three-year payback periods as barriers to passive-cooling adoption in 2025. Public, comparable transaction prices for radiative-cooling coatings, films and membranes were not identified, so product-level pricing cannot be stated reliably.[11]
Trends, drivers & challenges
Demand is being driven by rising heat exposure, building-energy standards, grid peak-load concerns and applications in buildings, data centres, cold chains and industrial infrastructure. Key challenges include soiling, weathering, durability, humidity, maintenance and the need to scale low-cost manufacturing; Meticulous Research identifies warranted durability and commodity-level costs as important conditions for mainstream adoption around 2030.[9][12][11]
Consumer behavior & competition
Purchasers are primarily developers, architects, building owners, utilities and industrial operators rather than household consumers. Adoption is strongest where products can demonstrate lower cooling demand, code compliance and acceptable payback; competition is shifting toward coatings, roofing systems, films and integrated building-envelope products.[11][9]
Regulation
California’s 2025 Energy Code applies to building permit applications submitted from January 1, 2026. For applicable low-sloped nonresidential roofs, the code requires either aged solar reflectance of at least 0.63 and thermal emittance of at least 0.75, or a solar reflectance index of at least 75; roofing products must be tested and labelled through the Cool Roof Rating Council.[13]
Latest news
In September 2026, Chinese passive-cooling company i2Cool reportedly closed a Series B financing round, while UK company SolarSub announced a £1.34 million funding round to commercialise passive cooling for photovoltaic modules. These financings indicate continuing investment in specialist radiative-cooling technologies, although they are not acquisitions.[14][15]

02 Ranking

Top 9 Companies in the Passive Radiative Cooling Industry

The leading companies in the passive radiative cooling industry, ranked on market impact, performance, momentum, innovation and brand popularity.

Updated November 20, 2026 · Next review December 20, 2026

Verdict

i2Cool leads the passive radiative cooling industry with passive radiative cooling paints and films made from polymers and proprietary nanomaterials, while Azure Era Energy Saving Technology stands out backed by its 73.32% revenue growth for energy-saving radiative-cooling and optical coatings.

Ranked by Overall score · How we score ↓

Editor's top 3 picks

Where to start, by need.

  1. #1 Overall · Leader in cooling coatings

    i2Cool

    HK

    Ranked #1 · 9.6 · Cooling coatings

    Why we picked it: It sells passive cooling coatings in paint and film formats built on polymer bases with proprietary nanomaterials.

  2. Leader in cooling membranes and sheets

    SPACECOOL

    JP

    Ranked #3 · 8.9 · Cooling membranes and sheets

    Why we picked it: It develops, manufactures and sells radiative cooling products for passive cooling without electricity use.

  3. Leader in radiative cooling films

    MG New Energy Technology

    CN

    Ranked #4 · 8.9 · Radiative cooling films

    Why we picked it: It focuses on scaling radiative cooling materials for electronics, vehicles and buildings.

Pick 1 is the #1 company overall. Picks 2 and 3 are the highest-ranked companies in the top 5 that add a new segment.

Full ranking

Sort by
Top 9 companies in the passive radiative cooling industry, 2026 – Gitnux ranking
#CompanyOverall ↓Company snapshot
1

i2Cool

Cooling coatings · HK

9.6
2

Azure Era Energy Saving Technology

Cooling coatings · HK

8.9
3

SPACECOOL

Cooling membranes and sheets · JP

8.9
4

MG New Energy Technology

Radiative cooling films · CN

8.9
5

SkyCool Systems

Radiative cooling panels and roofing · US

8.3
6

3M

Passive cooling film for transport · US

8.3
7

Ningbo Radi-Cool Advanced Energy Technologies

Radiative cooling films, coatings and fabrics · CN

8.2
8

Pirta

Passive radiative cooling paint · GB

7.6
9

Cryo X Co

PDRC paint for roofs, vehicles and equipment · US

7.2

How we score

  • Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
  • Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
  • Momentum (20%): growth trajectory and future potential.
  • Innovation (15%): R&D intensity and how technologically advanced the company is.

Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.

Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.

Cadence Recalculated when new figures are published; next review December 20, 2026.

Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.

Cite this ranking

APA

Samuel Norberg. (2026, November 20). Top 9 companies in the passive radiative cooling industry. In Passive Radiative Cooling Industry Statistics. Gitnux. https://gitnux.org/passive-radiative-cooling-industry-statistics/#top-companies

04 Statistics

Market Intelligence

The category shows divergent market definitions: the same broader area is reported at $1.46 billion in 2025 by 360iResearch and $50.77 million in 2025 by QYResearch.

Market size, volume and shipments in the passive radiative cooling industry

  • USD 69.2 million was the global passive radiative cooling panel market size in 2025, measured in market value; Dataintelo includes coatings, films, membranes, textiles and fluid-cooled radiative panels.[1]
  • USD 8 billion was the global electricity-free passive radiative cooling market size in 2024, measured in market value; KPMG defines the category as electricity-free passive radiative cooling technology across global regions.[2]
  • USD 1.46 billion was the global passive radiative cooling materials market size in 2025, measured in market value; 360iResearch covers passive radiative cooling materials across product and application segments.[3]
  • 3,161.48 thousand square metres was global passive radiative cooling paint production in 2025, measured as output volume; Global Info Research reports supply, demand and production for passive radiative cooling paint.[4]
  • USD 50.77 million was the global passive radiative cooling materials market size in 2025, measured in market value; QYResearch covers coatings, films, panels, textiles and composite applications.[5]
  • USD 475 million was the global passive daytime radiative cooling film market size in 2025, measured in market value; DMA includes polymeric, metal-based and hybrid films across applications and distribution channels.[6]

Forecast growth and shipments in the passive radiative cooling industry

  • A 21.0% compound annual growth rate is forecast for the global passive radiative cooling panel market from 2025 to 2034, reaching USD 384.7 million; Dataintelo includes coatings, films, membranes, textiles and panels.[1]
  • A 26.76% compound annual growth rate is forecast for global passive radiative cooling materials from 2026 to 2032, reaching USD 371.15 million; QYResearch measures revenue across coatings, films, panels, textiles and composites.[5]
  • A 63.7% compound annual growth rate is forecast for the global electricity-free passive radiative cooling market from 2024 to 2030; KPMG measures the category in billion RMB across coatings, films, textiles and other products.[2]
  • An 18.2% compound annual growth rate is forecast for the global passive daytime radiative cooling film market from 2026 to 2033, reaching USD 1,809.81 million; DMA measures film-market revenue.[6]

Company counts and size structure in the passive radiative cooling industry

  • A CR5 concentration ratio of approximately 72.00% was reported for global passive radiative cooling materials production value in 2025, covering Radi-Cool, MG Energy, i2Cool, SPACE COOL and Azure Era.[5]
  • Three hundred fifty-three company matches were identified worldwide for radiative cooling manufacturers as of September 30, 2026; RevenueBase defines the population through business-description matches rather than an official industry classification.[7]
  • Sixteen companies were profiled in a global passive radiative cooling panel market competitive chapter for 2025, covering suppliers of coatings, films, membranes, textiles and fluid-cooled panels.[1]

05 Statistics

Product & Standards

No dedicated standards were identified, and measurement standards remain under development, which affects comparability across test programs and product reporting.

Standards, grades and specs for passive radiative cooling

  • No dedicated standards or regulations for passive radiative cooling were identified by REHVA; the journal notes that the technology is new and that measurement standards remain under development.[8]

Key questions about the passive radiative cooling industry

How large is the passive radiative cooling materials market in 2026?
The passive radiative cooling materials market is estimated at $1.5–2.5 billion in 2026, covering coatings, films, membranes, glazing and textiles sold as passive cooling products.
What growth rate is expected for 2026–2036?
Meticulous Research forecasts the market reaching $15–22 billion by 2036, implying an indicative CAGR of 24–27% from 2026 to 2036.
Which companies lead the passive radiative cooling industry?
i2Cool leads the passive radiative cooling industry with passive radiative cooling paints and films made from polymers and proprietary nanomaterials, while Azure Era Energy Saving Technology stands out backed by its 73.32% revenue growth for energy-saving radiative-cooling and optical coatings.
What shift has been observed in the commercialisation model?
The sector is shifting from a technology-demonstration model toward an engineering-procurement model as larger industrial companies enter after 2025.
Is the market concentrated or fragmented?
The market remains fragmented between specialist technology companies and larger coating, construction-material and functional-film producers, and no reliable public source identified a global concentration ratio.
Which regulations affect cool-roof adoption in the U.S.?
California’s 2025 Energy Code applies to building permit applications from January 1, 2026, requiring either aged solar reflectance of at least 0.63 and thermal emittance of at least 0.75, or a solar reflectance index of at least 75, with Cool Roof Rating Council testing and labelling.
Reference

Cite This Report

This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.

APA
Samuel Norberg. (2026, November 20). Passive Radiative Cooling Industry Statistics. Gitnux. https://gitnux.org/passive-radiative-cooling-industry-statistics
MLA
Samuel Norberg. "Passive Radiative Cooling Industry Statistics." Gitnux, 20 Nov 2026, https://gitnux.org/passive-radiative-cooling-industry-statistics.
Chicago
Samuel Norberg. 2026. "Passive Radiative Cooling Industry Statistics." Gitnux. https://gitnux.org/passive-radiative-cooling-industry-statistics.