Gitnux/Report 2026

Mill Products Industry Statistics

The global steel mills products market was valued at $553.61 billion in 2025, explore growth, companies, and the 2026 regulatory and pricing signals shaping mill products.
25Statistics
20Sources
6Sections
1Visuals
17mRead
How this report is researched
01Editorial Scope

Before any source is gathered, an editor locks the question, what qualifies, and how the piece will be judged.

02Source Research

Search agents collect the source set and pull each data point out with its provenance attached.

Read our full methodology →

Search agents attach provenance to every extracted figure.

Next review: within 32 days

01 Industry overview

The mill products industry at a glance

The global steel mill products industry produced 1,848.9 million tonnes of crude steel in 2025, with China accounting for about 52% of output and demand increasingly shaped by infrastructure, automotive, decarbonization and trade policy.

$553.6B[6]
Global market size, 2025
4.19%[6]
Forecast CAGR, 2026–2034
1,848.9 Mt[7]
Global crude steel output, 2025
52.0%[7]
China share of output, 2025
Market size
The global steel mills products market was valued at $553.61 billion in 2025, according to The Insight Partners. In U.S. trade data, steel mill product imports were valued at $31.78 billion in 2024, while aluminum mill product imports totaled $7.61 billion.[6][5]
Forecast & CAGR
The global steel mills products market is forecast to reach $801.04 billion by 2034 from $553.61 billion in 2025, implying a 4.19% CAGR for 2026–2034. The forecast covers billets, blooms, rebars, wire rod, sections, rails, sheet piles and drawn wires.[6]
Market share & regions
Asia produced 1,325.2 million tonnes of crude steel in 2025, representing about 73.8% of the 1,794.0 million tonnes reported across regional totals in the World Steel Association table; China alone produced 960.8 million tonnes, or about 52.0% of the world total. The European Union produced 122.6 million tonnes and North America 105.8 million tonnes.[7]
Segmentation
Steel mill products are segmented by product type, including billets, blooms, rebars, wire rod, sections, rails, sheet piles and drawn wires. Major end-use segments are automotive, infrastructure and construction, and industrial manufacturing.[6]
Key players & concentration
The industry includes large integrated producers and electric-arc-furnace operators such as China Baowu, ArcelorMittal, Ansteel, Nippon Steel and POSCO. China produced 960.8 million tonnes of crude steel in 2025, while the top 50 steel-producing companies are separately ranked by the World Steel Association, indicating a large but concentrated group of global leaders alongside many regional mills.[7]
Pricing
The U.S. producer price index for steel mill products was 399.645 in October 2026, using 1982 as the index base. This indicates that mill-product pricing remains materially above its historical base, although the index itself does not measure a single product price.[8]
Trends, drivers & challenges
Growth is supported by infrastructure, construction, automotive and industrial demand, while decarbonization is increasing investment in electric-arc furnaces and lower-emission production. The main challenges are excess capacity, volatile raw-material and energy costs, weaker regional demand and trade restrictions; global crude steel output fell from 1,886.8 million tonnes in 2024 to 1,848.9 million tonnes in 2025.[7][6]
Consumer behavior & competition
Mill products are business-to-business inputs rather than consumer products, so purchasing is driven mainly by specifications, delivered cost, quality, reliability, lead times and embedded-carbon requirements. Competition is increasingly based on high-strength and specialty grades, regional supply security and lower-emission production, alongside price competition in commodity flat and long products.[6][9]
M&A
M&A activity remained active in 2025 across steel manufacturing, processing and distribution. Reported transactions included the proposed combination of Ryerson and Olympic Steel, Mill Steel's acquisition of Maryland Metals Processing and Olympic Steel's acquisition of Metal Works; Consolidated Mill Supply also sold Miller and Company to the Unimetal Group.[10][11]
Regulation
The EU Carbon Border Adjustment Mechanism entered its definitive regime on January 1, 2026 and covers iron, steel and aluminum imports, among other sectors. EU importers bringing in more than 50 tonnes of covered goods must apply for authorized declarant status and purchase certificates linked to embedded emissions.[9]
Latest news
The latest major regulatory development is the European Commission's November 16, 2026 adoption of rules for recognizing carbon prices paid in non-EU countries under CBAM. Separately, worldsteel's latest annual data reports 1,848.9 million tonnes of global crude steel production for 2025.[9][7]

02 Ranking

Top 10 Companies in the Mill Products Industry

The leading companies in the mill products industry, ranked on market impact, performance, momentum, innovation and brand popularity.

Updated November 21, 2026 · Next review December 21, 2026

Verdict

Cargill stands out for global grain processing and milling because it operates grain processing and milling businesses across global food and agriculture markets, while Ardent Mills focuses on flour, pulses, organic and gluten-free ingredients since it has more than 40 locations specializing in those products.

Ranked by Overall score · How we score ↓

Editor's top 3 picks

Where to start, by need.

  1. #1 Overall · Leader in grain flour milling

    Cargill

    US

    Ranked #1 · 9.4 · Grain flour milling

    Why we picked it: Cargill operates grain processing and milling businesses across global food and agriculture markets.

  2. Leader in grain merchandising & milling

    Bunge Global

    US

    Ranked #3 · 8.9 · Grain merchandising & milling

    Why we picked it: Bunge reported $18.1 billion of 2025 net sales in Grain Merchandising and Milling.

  3. Leader in rice milling

    LT Foods

    IN

    Ranked #4 · 8.8 · Rice milling

    Why we picked it: LT Foods operates integrated rice processing and milling operations serving Indian and international rice needs.

Pick 1 is the #1 company overall. Picks 2 and 3 are the highest-ranked companies in the top 5 that add a new segment.

Full ranking

Sort by
Top 10 companies in the mill products industry, 2026 – Gitnux ranking
#CompanyOverall ↓Company snapshot
1

Cargill

Grain flour milling · US

9.4
2

Ardent Mills

Grain flour milling · US

8.9
3

Bunge Global

Grain merchandising & milling · US

8.9
4

LT Foods

Rice milling · IN

8.8
5

GoodMills Group

Grain flour milling · AT

8.8
6

Grain Craft

United States flour and corn milling · US

8.7
7

Manildra Group

Australian wheat flour and starch milling · AU

8.7
8

Nisshin Seifun Group

Japanese and international flour milling · JP

8.3
9

Ingredion

Corn wet milling and starch ingredients · US

8.3
10

Seaboard

Global flour and commodity milling · US

8.1

How we score

  • Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
  • Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
  • Momentum (20%): growth trajectory and future potential.
  • Innovation (15%): R&D intensity and how technologically advanced the company is.

Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.

Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.

Cadence Recalculated when new figures are published; next review December 21, 2026.

Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.

Cite this ranking

APA

Samuel Norberg. (2026, November 21). Top 10 companies in the mill products industry. In Mill Products Industry Statistics. Gitnux. https://gitnux.org/mill-products-industry-statistics/#top-companies

report visual · Comparison

Wheat flour production by U.S. milling region

Illinois, Indiana, and Wisconsin leads with 46K 1,000 hundredweight.

Illinois, Indiana, and Wisconsin46K 1,000 hundredweight
Kansas30K 1,000 hundredweight
North Dakota30K 1,000 hundredweight
California30K 1,000 hundredweight
Idaho, Montana, Oregon, Utah, and Washington29K 1,000 hundredweight
Texas25K 1,000 hundredweight
source-verifiedesmis.nal.usda.gov

04 Statistics

Market Intelligence

Market intelligence ties steel mills products valuation to mill-products demand proxies, including a USD 47.5 billion 2025 U.S. grain mill products estimate under ISIC 1531.

Market size, volume and shipments in the mill products industry

  • USD 47.5 billion was the 2025 U.S. market size for grain mill products, defined under ISIC 1531; this is a parent-category estimate within the broader mill products industry and is measured in market value.[1]

05 Statistics

Production & Operations

Production and operations emphasize throughput conditions via labor and output shifts, with U.S. textile mills output down 2.6% in 2025 and labor productivity up 4.8%.

Productivity and capacity use in the mill products industry

  • Unit labor costs increased 3.4% in 2025 for U.S. textile mills (NAICS 313), measuring labor cost per unit of output.[2]
  • Output fell 2.6% in 2025 for U.S. textile mills (NAICS 313), measured by the BLS industry productivity series.[2]
  • Labor productivity rose 4.8% in 2025, measured as output per hour for U.S. textile mills (NAICS 313).[2]
  • Hours worked fell 7.0% in 2025 for U.S. textile mills (NAICS 313), according to the BLS Productivity program.[2]

06 Statistics

People & Workforce

People and workforce reporting quantifies staffing and incident rates, including 79.7 thousand employees in February 2026 and 2.3 total recordable injury and illness cases per 100 full-time workers in 2025.

Employment and hiring in the mill products industry

  • 79.7 thousand people were employed by U.S. textile mills in February 2026, seasonally adjusted under NAICS 313.[3]
  • 7,600 textile knitting and weaving machine setters, operators, and tenders worked in U.S. textile mills in 2025.[3]
  • 12,960 textile winding, twisting, and drawing-out machine setters, operators, and tenders worked in U.S. textile mills in 2025.[3]

Wages and labour costs in the mill products industry

  • Textile mill production and operating supervisors had a 2025 median hourly wage of $30.62 and mean hourly wage of $33.05 in the United States.[2]
  • Textile knitting and weaving machine operators had a 2025 median hourly wage of $18.96 and mean hourly wage of $19.63 in the United States.[2]
  • Textile winding, twisting, and drawing-out machine operators had a 2025 median hourly wage of $18.47 and mean hourly wage of $18.78 in the United States.[2]

Workplace safety in the mill products industry

  • U.S. textile mills recorded 2.3 total recordable injury and illness cases per 100 full-time workers in 2025.[2]
  • Five fatal occupational injuries were recorded in U.S. textile mills in 2024, compared with three in 2023.[2]
  • U.S. textile mills recorded 0.9 cases involving job transfer or restriction per 100 full-time workers in 2025.[2]
  • U.S. textile mills recorded 1.7 cases involving days away from work, job restriction, or transfer per 100 full-time workers in 2025.[2]

07 Statistics

Pricing & Finance

Pricing and finance tracks grain- and steel-mill inputs using producer price indices, including corn mill products at 154.483 in September 2026 and steel mill products at 399.645 in October 2026.

Prices and price indices for mill products

  • The producer price index for corn mill products was 154.483 in September 2026, down from 155.502 in September 2025; the series uses 2012=100 and commodity code 1409082.[2]
  • The producer price index for wheat mill products, except flour, was 101.141 in September 2026, up from 97.292 in September 2025; the series uses 2012=100 and commodity code 1409081.[2]
  • The producer price index for other grain mill products was 141.217 in September 2026, up from 140.359 in September 2025; the series uses 2012=100 and commodity code 1409083.[2]

08 Statistics

Regulation & Risk

Regulation and risk centers on emissions compliance and trade-linked carbon, including CBAM’s definitive regime from January 1, 2026 and the revised Integrated Iron and Steel NESHAP deadline of April 3, 2027.

Regulations and compliance for mill products

  • April 3, 2027 is the revised compliance deadline for specified fugitive-particulate, opacity and work-practice standards under EPA’s Integrated Iron and Steel NESHAP, applying to U.S. integrated steel mills; effective July 3, 2025.[4]
  • Two EPA Method 9 readings per month are required at each affected basic-oxygen-furnace shop and blast-furnace casthouse under the Integrated Iron and Steel NESHAP; the requirement applies in the United States and was revised in 2025.[4]
  • Eight integrated iron and steel manufacturing facilities were operating in the United States when EPA revised the NESHAP in 2025; the plants were owned by two parent companies.[4]

09 Statistics

Sustainability

Sustainability provides product-level emissions intensity datapoints where available, including 0.67 metric tons CO₂e per metric ton of steel for U.S. carbon and alloy hot-worked long steel mill products in 2022.

Energy use and emissions in the mill products industry

  • 4.55 metric tons CO₂e per metric ton of steel was the 2022 average emissions intensity for U.S. stainless steel wire mill products; no newer product-level measurement was found.[5]
  • 0.67 metric tons CO₂e per metric ton of steel was the 2022 average emissions intensity for U.S. carbon and alloy hot-worked long steel mill products; no newer product-level measurement was found.[5]
  • 2.31 metric tons CO₂e per metric ton of steel was the 2022 average emissions intensity for U.S. stainless hot-rolled flat steel mill products; no newer product-level measurement was found.[5]
  • 2.17 metric tons CO₂e per metric ton of steel was the 2022 average emissions intensity for U.S. carbon and alloy coated flat steel mill products; no newer product-level measurement was found.[5]

Key questions about the mill products industry

What is the market size for mill products?
The global steel mills products market was valued at $553.61 billion in 2025. The U.S. market size for grain mill products was USD 47.5 billion in 2025 under ISIC 1531.
How fast is the mill products market expected to grow?
The global steel mills products market is forecast to reach $801.04 billion by 2034 from $553.61 billion in 2025. That implies a 4.19% CAGR for 2026–2034.
Which companies lead the mill products industry?
Cargill stands out for global grain processing and milling because it operates grain processing and milling businesses across global food and agriculture markets, while Ardent Mills focuses on flour, pulses, organic and gluten-free ingredients since it has more than 40 locations specializing in those products.
What technology shifts are shaping mill products operations?
Electric-furnace production keeps expanding, with low-emission steel investment accelerating. Melt-and-pour traceability expands as a competitive and compliance-relevant capability.
How is the market structured across producers?
The industry includes large integrated producers and electric-arc-furnace operators. Production is concentrated globally, with China producing 960.8 million tonnes in 2025, about 52.0% of world output.
What pricing signals are available for mill products?
The U.S. producer price index for steel mill products was 399.645 in October 2026, using 1982 as the index base. For grain mill products, the producer price index for corn mill products was 154.483 in September 2026.
Reference

Cite This Report

This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.

APA
Samuel Norberg. (2026, November 21). Mill Products Industry Statistics. Gitnux. https://gitnux.org/mill-products-industry-statistics
MLA
Samuel Norberg. "Mill Products Industry Statistics." Gitnux, 21 Nov 2026, https://gitnux.org/mill-products-industry-statistics.
Chicago
Samuel Norberg. 2026. "Mill Products Industry Statistics." Gitnux. https://gitnux.org/mill-products-industry-statistics.