Gitnux/Report 2026

Metal Detector Industry Statistics

294Statistics
96Sources
12Sections
1Visuals
49mRead
Samuel NorbergWritten by Samuel Norberg·Fact-checked by Maya Johansson
Published
How this report is researched
01Editorial Scope

Before any source is gathered, an editor locks the question, what qualifies, and how the piece will be judged.

02Source Research

Search agents collect the source set and pull each data point out with its provenance attached.

Read our full methodology →

Search agents attach provenance to every extracted figure.

Next review: within 39 days

01 Industry overview

The metal detector industry at a glance

The global metal detectors market is estimated at $1.8 billion in 2025 and is forecast to grow at a 9.05% CAGR through 2030, supported by security, industrial, mining and recreational demand.

$1.8B[21]
Global market size, 2025
9.05%[21]
Forecast CAGR, 2025–2030
$362M[10]
Minelab revenue, FY2026
45%[10]
Minelab profit margin, H1 FY2026
Market size
The global metal detectors market was estimated at $1.8 billion in 2025 by Mordor Intelligence. A separate 2026 estimate placed the market at $2.14 billion, illustrating the variation caused by differing market definitions and coverage.[21][83]
Forecast & CAGR
Mordor Intelligence forecasts the market to reach $2.77 billion by 2030, implying a 9.05% CAGR from 2025 to 2030. Another 2026 forecast projects $3.82 billion by 2032 at a 10.13% CAGR.[21][83]
Market share & regions
North America was identified as the largest regional market in 2025, while Asia-Pacific was forecast to record the fastest growth through 2030. One 2025 estimate assigned North America 33.35% of global revenue and Asia-Pacific 26.42%, but these shares come from a secondary market-research source and should be treated as indicative.[21][84]
Segmentation
The market spans walk-through and handheld detectors, ground-search equipment and industrial conveyor-based systems. Applications include security screening, food processing, mining, archaeology, military and recreational treasure hunting; one 2026 study reported that walk-through detectors represented 31.26% of 2025 revenue in its defined market.[22][84]
Key players & concentration
Major participants named in market coverage include Garrett Metal Detectors, CEIA, Minelab, WIPOTEC and Mettler Toledo. Available market research characterizes the overall market as low-concentration, but no reliable primary-source global concentration ratio was identified.[21]
Trends, drivers & challenges
Demand is being supported by airport and public-venue security, food and pharmaceutical quality controls, mining and gold prospecting, and recreational use. Key challenges include differing regulatory requirements, sensitivity and calibration demands, project-based procurement cycles and variability in gold-market activity; Minelab reported that favourable gold-price conditions supported first-half FY2026 demand in Africa.[21][10][85]
Consumer behavior & competition
Handheld detectors serve recreational users, gold prospectors, demining and military customers, while institutional demand comes from airports, government facilities and industrial plants. Codan reported that Minelab distributes through specialty outlets across the Americas, Europe, Africa and Asia-Pacific, with consumer revenue historically split across Asia-Pacific at 37%, Europe, the Middle East and Africa at 33%, and the Americas at 30%.[10][82]
Regulation
In U.S. aviation security, aircraft operators may use metal-detection devices to screen people only when authorized under an approved security program, and the devices must meet TSA calibration standards. In USDA meat programs, approved detectors must identify metallic contaminants and may require testing with a 3.0 mm stainless-steel test strip for inline systems.[86][85]
Latest news
Codan reported that Minelab’s first-half FY2026 revenue rose 46% year on year to $168.0 million, with segment profit of $76.2 million and a 45% margin. The company attributed the result to strong gold-detector demand, new product introductions and growth in its direct-to-consumer e-commerce platform.[10]
report visual · Comparison

Handheld metal detector market share by application

Airports and Transportation holds the largest share at 39.5%.

Airports and Transportation39.5%
Public Venues and Events25.6%
Government and Military21.1%
Industrial and Mining13.9%
source-verifiedpmarketresearch.com

02 Ranking

Top 10 Companies in the Metal Detector Industry

The leading companies in the metal detector industry, ranked on market impact, performance, momentum, innovation and brand popularity.

Updated November 10, 2026 · Next review December 10, 2026

Verdict

Codan leads Gitnux's 2026 metal detector ranking with an Overall score of 9.1, driven by Minelab revenue of $362M in FY2026. Nokta Detectors is the runner-up at 8.7, with exports to more than 100 countries from detectors manufactured in Istanbul.

Ranked by Overall score · How we score ↓

Editor's top 3 picks

Where to start, by need.

  1. #1 Overall · Leader in handheld consumer and gold detectors

    Codan

    AU

    Ranked #1 · 9.1 · Handheld consumer and gold detectors

    Why we picked it: It reports Minelab FY2026 revenue of $362M and H1 FY2026 profit margin of 45%.

    See in ranking ↓Visit codan.com.au ↗

  2. Leader in security and airport screening

    CEIA

    IT

    Ranked #3 · 8.7 · Security and airport screening

    Why we picked it: Its portfolio covers security, industrial and ground-search metal detection.

    See in ranking ↓Visit ceia.net ↗

  3. Leader in food processing inspection

    Ishida

    JP

    Ranked #4 · 8.6 · Food processing inspection

    Why we picked it: Its offering combines weighing with metal detection for food-processing lines.

    See in ranking ↓Visit ishidaeurope.com ↗

Pick 1 is the #1 company overall. Picks 2 and 3 are the highest-ranked companies in the top 5 that add a new segment.

Full ranking

Sort by
Top 10 companies in the metal detector industry, 2026 – Gitnux ranking
#CompanyOverall ↓Company snapshot
1

Codan

Handheld consumer and gold detectors · AU

9.1
2

Nokta Detectors

Handheld consumer and gold detectors · TR

8.7
3

CEIA

Security and airport screening · IT

8.7
4

Ishida

Food processing inspection · JP

8.6
5

Thermo Fisher Scientific

Industrial inspection metal detection · US

8.5
6

XP Metal Detectors

Handheld consumer and gold detectors · FR

8.5
7

Minebea Intec

Food processing inspection · DE

8.3
8

Eriez Manufacturing

Industrial inspection metal detection · US

8.3
9

MULTIVAC

Food processing inspection · DE

8.3
10

Bizerba

Food processing inspection · DE

7.9

How we score

  • Impact (30%): scale and weight in the market (revenue, market share, employees, market position).

Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.

Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.

Cadence Recalculated when new figures are published; next review December 10, 2026.

Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.

Cite this ranking

APA

Samuel Norberg. (2026, November 10). Top 10 companies in the metal detector industry. In Metal Detector Industry Statistics. Gitnux. https://gitnux.org/metal-detector-industry-statistics/#top-companies

04 Statistics

Technology & Innovation

Security screening and industrial deployment both show measurable automation: for example, Garrett’s Paragon uses 22 horizontal bands and 66 detection zones, while 70,000 Anritsu units were installed worldwide by February 2026.

AI in the metal detector industry

  • 1 AI-enhanced technology development platform, Clarity, was introduced by Garrett in 2026 for its Paragon walk-through metal detector in the United States.[1]
  • 10 times faster screening and up to 70% lower total cost were claimed by Evolv for its AI-based weapons-detection systems compared with alternatives in 2023.[2]
  • 200 adjustable sensitivity levels are available on Garrett’s Paragon detector, whose software incorporates deep-learning enhancements.[1]
  • 1 billion visitors had been screened worldwide by Evolv’s AI-based weapons-detection systems by 2023.[2]

Automation in the metal detector industry

  • 70,000 Anritsu industrial metal-detector units had been installed worldwide by February 2026.[3]
  • 2010 was the year Fortress Technology says it became the first inspection company to automate routine safety checks of food metal detectors.[4]
  • 22 independently adjustable horizontal bands are used by Garrett’s Paragon to automate zone-specific configuration across the walk-through portal.[1]

Digital Transformation in the electronics and semiconductors sector (sector benchmark)

  • Across semiconductor companies surveyed globally, 75% reported having some automated processes in 2024.[5]
  • Across semiconductor companies surveyed globally, 56% reported that IT was fully aligned with transformation priorities in 2024.[5]
  • Across semiconductor companies surveyed globally, 12% reported fully automated processes supported by advanced analytics in 2024.[5]
  • Across the electronics industrial ecosystem, 33% of companies had a concrete digital-transformation strategy in 2024, based on an enterprise survey.[6]

Technology Adoption in the electronics and semiconductors sector (sector benchmark)

  • Across the electronics industrial ecosystem, 22.73% of companies had adopted edge computing in 2024.[7]
  • Across the electronics industrial ecosystem, 31.43% of companies had adopted artificial intelligence in 2024.[7]
  • Across the electronics industrial ecosystem, 4.98% of companies had adopted robotics in 2024.[7]
  • Across EU enterprises, 59% reached at least a basic level of digital intensity in 2023, including 91% of large enterprises and 58% of SMEs.[8]

Cloud Computing in the electronics and semiconductors sector (sector benchmark)

  • Among EU small and medium-sized enterprises, 44% purchased cloud-computing services in 2023.[8]
  • Across the electronics industrial ecosystem, 26.89% of companies had adopted cloud computing in 2024.[7]
  • Among large EU enterprises, 78% purchased cloud-computing services in 2023.[8]
  • Across EU enterprises, 45.2% purchased cloud-computing services in 2023.[8]

Big Data in the electronics and semiconductors sector (sector benchmark)

  • Among small EU enterprises, 13% carried out big-data analysis in 2020.[7]
  • Across the electronics industrial ecosystem, 11.43% of companies had adopted big-data technologies in 2024.[7]
  • Across EU enterprises, 14% used big-data analysis in 2020, the latest comparable EU-wide figure reported by the European Commission.[7]
  • Among large EU enterprises, 34% carried out big-data analysis in 2020.[7]
  • Among medium-sized EU enterprises, 21% carried out big-data analysis in 2020.[7]

IoT in the electronics and semiconductors sector (sector benchmark)

  • Among small EU enterprises, 26% used Internet of Things devices or systems in 2021.[8]
  • Across EU enterprises, 29% used Internet of Things devices or systems in 2021.[8]
  • Among large EU enterprises, 48% used Internet of Things devices or systems in 2021.[8]
  • Across the electronics industrial ecosystem, 34.72% of companies had adopted Internet of Things technologies in 2024.[7]

Innovation in the metal detector industry

  • $162.4 million was Minelab’s FY2026 segment profit, up 65% year over year.[9]
  • 3 new or upgraded metal detectors were launched by Minelab in the first half of FY2026.[10]

05 Statistics

Data & Analytics

The industry’s data focus centers on measurable inspection quality and operational throughput, including 32 tons of honey-roasted nuts inspected daily with zero false rejects at Trigon Snacks and 2 billion-plus daily inspections for Detection Technology in 2022.

Business intelligence in the metal detector industry

  • $262.3 million was Codan’s metal-detection revenue in fiscal 2022, representing 52% of group revenue globally.[11]
  • $176.1 million was Codan’s metal-detection revenue in fiscal 2023, representing 39% of group revenue globally.[11]
  • 30-plus years was Detection Technology’s duration of service to major industry players by 2022 globally.[12]
  • 32% was Minelab’s metal-detection segment profit margin in fiscal 2023 globally.[9]
  • 10-plus Forbes Global 2000 companies were Detection Technology customers in 2022 globally.[12]
  • Five adjustable frequencies were available in real time on Thermo Scientific Sentinel multiscan metal detectors in 2026 globally.[13]

Data analytics in the metal detector industry

  • 50% was the increase in detection sensitivity reported after Fortress developed an automated bulk checkweigher and metal-detector system for a food producer.[14]
  • 4.0 mm was the pre-upgrade stainless-steel detection sensitivity reported in a representative food metal-detector project.[15]
  • 2.5 mm was the pre-upgrade ferrous detection sensitivity reported in a representative food metal-detector project.[15]
  • 32 tons of honey-roasted nuts were inspected daily with zero false rejects during the first year of installation at Trigon Snacks.[16]
  • 3.0 mm was the pre-upgrade non-ferrous detection sensitivity reported in a representative food metal-detector project.[15]
  • 1.2–1.8 mm was the post-upgrade non-ferrous detection sensitivity reported in the same representative food metal-detector project.[15]

Data Quality in the electronics and semiconductors sector (sector benchmark)

  • 40% of manufacturing leaders, across sectors including electronics, said their organizations were falling behind competitively because they were not adopting automation requiring high-quality data in 2024.[17]
  • 70% of electronics-industry professionals manually validate and optimize bills of materials without real-time intelligence, according to a 2024 global survey.[18]
  • 46.4% of manufacturing organizations reported having a process to verify raw-data accuracy or quality before decisions were made, in a 2023 survey.[19]
  • 98% of manufacturing leaders, including electronics-related industries, reported operational data problems in a 2024 survey of 500 respondents; global manufacturing scope.[17]
  • 49% of supply-management organizations rated their data quality as good or excellent in the 2024 Institute for Supply Management survey.[20]
  • 60% of electronics-industry survey respondents manually pulled data for a sourcing event for two weeks or more in 2024, indicating substantial data-preparation effort.[18]

Data Governance in the electronics and semiconductors sector (sector benchmark)

  • 81% of supply-management data-governance functions were housed in a center of excellence in the 2024 Institute for Supply Management survey.[20]
  • 12% of semiconductor respondents reported fully automated processes with advanced analytics, a governance-relevant indicator of enterprise data integration, in the 2024 study.[5]
  • 47% of supply-management organizations said their data-governance program was useful in the 2024 Institute for Supply Management survey.[20]
  • 54% of supply-management organizations reported giving data top priority, while 90% agreed that data governance was necessary, in a 2024 survey.[20]
  • 56% of semiconductor companies reported full alignment between IT and transformation priorities in Deloitte’s survey, up from 37% in 2021; semiconductor-industry scope.[5]
  • 61% of supply-management organizations reported having a dedicated data-governance function in the 2024 Institute for Supply Management survey.[20]

KPIs in the metal detector industry

  • 32 tons per day was the inspection throughput reported for Trigon Snacks’ honey-roasted nut line.[16]
  • 6.9 million-plus cumulative solutions shipped was reported by Detection Technology in 2022, a deployment-volume KPI.[12]
  • 50–1,000 kHz was the operating frequency range available for Thermo Scientific Sentinel multiscan detectors in 2026.[13]
  • Five frequencies were simultaneously available for Thermo Scientific Sentinel multiscan detection in 2026, supporting sensitivity tracking across applications.[13]
  • 500-plus world-class brands were reported as using Detection Technology competencies in 2022, a customer-coverage KPI.[12]
  • 2 billion-plus daily inspections were reported for Detection Technology solutions in 2022, an industry-scale operational-volume KPI.[12]

06 Statistics

Strategy & Growth

Growth planning ties to product cadence and market forecasts; Minelab reported four new products listed for FY2026 and the global market forecast reaches $2.77 billion by 2030 with a 9.05% CAGR.

Growth in the metal detector industry

  • $220 million was Minelab’s metal detection revenue in Codan’s fiscal 2024, up 25% from fiscal 2023.[10]
  • 35% was Minelab’s metal detection segment profit margin in fiscal 2024, compared with 32% in fiscal 2023.[10]
  • $2.77 billion is the forecast global metal detector market size for 2030.[21]
  • $1.83 billion is the projected global metal detector market size for 2034.[22]
  • 39% was Minelab’s metal detection segment profit margin in fiscal 2025.[10]
  • $254.8 million was Minelab’s metal detection revenue in fiscal 2025, up 16% from the prior year.[10]

Differentiation in the metal detector industry

  • 33 distinct pinpoint zones distinguish Garrett’s PD 6500i walk-through metal detector.[1]
  • 4 sensitivity levels differentiate Garrett’s ACE 200i entry-level recreational detector.[1]
  • 5 sensitivity levels are available on Minelab’s X-TERRA VOYAGER detector.[23]
  • 99 points are available on the Garrett ACE 200i’s digital target-identification scale.[1]
  • 1 meter is the stated waterproof depth of Minelab’s X-TERRA VOYAGER detector.[23]
  • 2 sensitivity settings differentiate C.Scope’s SD100 security metal detector.[24]

Mergers and acquisitions in the metal detector industry

  • 1 acquisition made Checkpoint Systems the owner of Denmark-based Alert Systems in 2023.[25]
  • 1 acquisition transferred Kellyco Metal Detectors from Mollenhour Gross to its president in 2022.[25]
  • 4 global manufacturing sites resulted from Fortress Technology’s acquisition of Dynamic Inspection in 2023.[26]
  • 3 metal- and magnet-detection products from Alert Systems were identified by Checkpoint as Hyperguard, Metalguard and Apparelguard.[25]
  • 1 acquisition transferred ownership of New Zealand metal detector manufacturer Dynamic Inspection to Fortress Technology in 2023.[26]
  • 50 countries were supplied by MESUTRONIC before its 2019 acquisition by INDUS Holding.[27]

Strategic partnerships in the metal detector industry

  • 5 people comprised the dedicated Eriez metal-detection research team based at Cardiff University’s innovation hub after the partnership expanded.[28]
  • 1 partnership enabled Smiths Detection and Deepnoid to test AI integration in security-screening systems in 2025.[29]
  • 1 strategic distribution partnership was signed between Westminster Group and RISK Metal Detectors in 2025.[30]
  • 30 states were covered by STVS when it announced its Garrett Metal Detectors partnership in 2024.[31]
  • 1 distribution agreement made STVS a nationwide supplier of Garrett handheld and walk-through metal detectors in the United States in 2024.[31]
  • 1 strategic partnership linked Liberty Defense and Point Security in January 2024 for concealed-weapons detection solutions.[32]

07 Statistics

People & Workforce

Workforce facts highlight global service capacity and engagement scale, including 85% employee survey participation at Codan and 110+ nationalities among Smiths Detection colleagues in 2026.

Hiring in the metal detector industry

  • 50+ countries have Smiths Detection colleagues or operations in 2026.[29]
  • 385 Detection Technology employees were based in China at December 31, 2025.[33]
  • 5 Detection Technology employees were based in India at December 31, 2025.[33]
  • 9 Detection Technology employees were based in France at December 31, 2025.[33]
  • 110+ nationalities are represented among Smiths Detection colleagues globally in 2026.[29]

Employee retention in the metal detector industry

  • 2,200 unique participants joined the joint John Crane and Smiths Detection learning and development week in FY2024.[34]
  • 75% of the targeted women’s leadership and engineering cohort participated in Smiths’ listening roundtables in FY2024.[34]
  • 17 countries have Smiths Detection sales and service teams, according to the company’s skills profile.[35]
  • 25 Accelerate Fundamentals leadership cohorts were trained by Smiths in FY2024.[34]
  • 85% of Codan employees participated in the companywide employee engagement survey launched in September 2023.[9]

Remote Work in the electronics and semiconductors sector (sector benchmark)

  • In the United States, 33% of surveyed employees had a hybrid arrangement in 2025, defined as working in the office one to four days weekly.[36]
  • Globally, 6% of surveyed employees were fully remote, working in the office fewer than one day per week, in 2025.[36]
  • Globally, employees averaged 3.74 days per week in the office in 2025, indicating limited fully remote work across surveyed organizations.[36]
  • Across computer and electronics manufacturing, 12.4% of positions were fully remote in the United States in 2024.[37]

Hybrid Work in the electronics and semiconductors sector (sector benchmark)

  • Globally, 74% of respondents approved of fully flexible hybrid work policies in 2025.[36]
  • Globally, 44% of surveyed employees had hybrid working arrangements in 2025, defined as one to four days per week in the office.[36]
  • Across manufacturing, 45% of surveyed employees had hybrid working arrangements in 2025, defined as one to four days per week in the office.[36]
  • Across computer and electronics manufacturing, 49.9% of positions were fully hybrid in the United States in 2024.[37]

Upskilling in the metal detector industry

  • 658 thousand Australian dollars was Codan’s learning-and-development expenditure in FY2024.[9]
  • 372 participants joined Smiths’ EmpowerYou workshops for senior engineering and early-career female colleagues across 19 countries in FY2024.[34]
  • 60 Metallus employees were working as apprentices when the company reported its apprenticeship data.[38]
  • 12 cross-divisional Lean Management System workshops were completed by Smiths in FY2024.[34]
  • 40 hours of learning opportunities were provided during the joint John Crane and Smiths Detection development week in FY2024.[34]

Employee Engagement in the electronics and semiconductors sector (sector benchmark)

  • 80% was Micron’s FY2024 employee engagement and satisfaction score from its global Micron Voice survey.[9]
  • 65% of employees at Powerchip Semiconductor Manufacturing were actively engaged in 2025, based on an employee engagement survey covering the company’s workforce.[9]
  • 8.4 out of 10 was KLA’s 2025 annual employee-engagement survey result across its global semiconductor workforce.[9]
  • 78.9% was ASML’s 2025 employee engagement score, measured as a three-year rolling average across its global semiconductor-industry workforce.[39]
  • 81.2 points was United Microelectronics Corporation’s 2025 overall work-engagement index, compared with a semiconductor-industry norm of 76 points.[9]

DEI in the metal detector industry

  • 74% of Codan’s whole workforce were men in FY2025.[9]
  • 75% of the targeted women’s leadership and engineering cohort participated in Smiths’ diversity listening roundtables in FY2024.[34]

08 Statistics

Customer & Sales

Buyer impact is documented through installed base and line expansion figures, including Minelab Africa revenue of approximately $115 million in fiscal 2025 and Huuskes using more than 20 Fortress systems over two decades.

Customer experience in the metal detector industry

  • Fortress reported that its Interceptor installation improved stainless-steel detection sensitivity by up to 100% for difficult wet products in its 2015 product release.[14]
  • American Pop Corn reported zero metal-related consumer complaints after installing Eriez metal detectors at its United States production facility, as reported in 2025.[40]
  • Six new Fortress Stealth metal detectors were added at Huuskes production lines to inspect more than 15,000 meals prepared for hospitals and care homes in the Netherlands in 2025.[14]
  • Boston Sword & Tuna installed its first METTLER TOLEDO Profile Advantage metal detector in 2020 and added two more units on other packaging lines in 2023.[41]
  • Levantine first acquired a Fortress Stealth Gravity metal detector in 2013 and selected the latest version of the system for an additional line in the United Kingdom in 2023.[14]

Customer retention in the metal detector industry

  • Boston Sword & Tuna added two METTLER TOLEDO metal detectors in 2023 after installing its first unit in 2020, bringing the documented total to three systems.[41]
  • Huuskes has used more than 20 Fortress metal detection systems over two decades and invested in six additional Stealth units for newer production lines by 2025.[14]
  • Minelab’s fiscal 2025 revenue increased 16% year on year to $254.8 million, supported by product development and expanded retail and e-commerce distribution.[10]
  • Minelab Africa generated approximately $115 million in fiscal 2025 revenue, up 64% year on year, reflecting demand across new and existing African markets excluding Sudan.[10]
  • 25 years separated Toney Lumber’s original Fortress detector installation from its upgrade to a new model in North Carolina, demonstrating a long equipment relationship in 2023.[14]

Customer acquisition in the metal detector industry

  • Minelab’s fiscal 2025 rest-of-world revenue was maintained versus the prior corresponding period despite challenging consumer conditions, according to Codan’s annual results announcement.[10]
  • Minelab’s fiscal 2025 Africa revenue rose 54% year on year to approximately $115 million on a full-year basis, excluding Sudan.[10]
  • Codan reported that its metal detection products were sold in more than 150 countries through dealers, distributors and agents, providing a broad international customer-acquisition channel.[23]
  • Minelab planned four new detector products for fiscal 2026 to support future market growth through expanded physical and e-commerce distribution channels.[10]
  • Minelab expanded retail distribution across North America and Europe during fiscal 2024 while also increasing use of Amazon and its own e-commerce channels.[10]

Customer loyalty in the metal detector industry

  • Minelab’s fiscal 2024 segment profit margin increased to 35% from 32% in fiscal 2023 as revenue grew and new products reached customers.[10]
  • Levantine selected the latest Fortress detector version for a second line after its first system had operated since 2013, citing the same reliability and accuracy requirements in 2023.[14]
  • 25 years after its first Fortress installation, Toney Lumber upgraded to another Fortress detector while continuing to use the original machine for reinspection work in North Carolina in 2023.[14]
  • Minelab’s segment profit margin increased to 39% in fiscal 2025 from 35% in fiscal 2024, supported by scale and a higher proportion of gold detector sales.[10]
  • Quest Metal Detectors states that it invests more than 30% of revenue in technology development while prioritizing customer and dealer satisfaction.[42]

09 Statistics

Marketing & Brand

Brand and advertising activity is tracked through platform metrics, such as 6,618 LinkedIn followers shown for Minelab Metal Detectors in 2026 and 570 reviewed metal-detector advertisements listed by Meta in October 2026.

Marketing in the metal detector industry

  • 3.5 million views had been accumulated by metal-detecting creator Paul Cee across Instagram and YouTube by 2026.[43]
  • 26 advertisements were live for CKG Metal Detecting in the Meta Ad Library in October 2026.[44]
  • 7% of the reviewed metal-detector advertisements included a discount in October 2026.[44]
  • 10% of the reviewed metal-detector advertisements displayed a price in October 2026.[44]
  • 570 advertisements were listed by Meta for the reviewed metal-detector advertisers in October 2026.[44]

Digital marketing in the metal detector industry

  • 32 active digital advertisements were attributed to Metal Detector, Coin Scanner in October 2026.[44]
  • 26 active digital advertisements were attributed to CKG Metal Detecting in October 2026.[44]
  • 44 days was the median duration of the reviewed metal-detector digital advertisements in October 2026.[44]
  • 495 metal-detector advertisements were active across the reviewed advertisers in October 2026.[44]
  • 41% of the 61 reviewed metal-detector advertisements were video advertisements in October 2026.[44]

Branding in the metal detector industry

  • Three consecutive editions had been held by DetectHistory when its 2021 awards page described the event.[45]
  • 6,444 LinkedIn followers were shown for Garrett Metal Detectors when the company profile was crawled in 2026.[46]
  • More than 5,000 people participated in DetectHistory’s metal-detector awards survey, according to an interview with Nokta Makro’s sales and marketing director.[45]
  • 6,618 LinkedIn followers were shown for Minelab Metal Detectors when the company profile was crawled in 2026.[46]
  • 47 countries were identified as the live footprint for the detectorist-focused Rodek app in its creator-partnership program.[47]

Social media in the metal detector industry

  • 6,618 LinkedIn followers were shown for Minelab Metal Detectors’ company page when it was crawled in 2026.[46]
  • 1.1 million Facebook followers were reported by History Seekers Metal Detectors on its company profile in 2026.[48]
  • 47 countries were included in Rodek’s creator and influencer program for detectorists in 2026.[47]
  • 6,444 LinkedIn followers were shown for Garrett Metal Detectors’ company page when it was crawled in 2026.[46]
  • 6,456 LinkedIn followers were displayed on a Minelab 35th-anniversary post when it was crawled in 2026.[46]

Influencer Marketing in the electronics and semiconductors sector (sector benchmark)

  • 27% of technology marketers globally reported dedicated but flat creator or influencer budgets in Nielsen’s 2026 survey.[49]
  • 5% of technology marketers globally reported dedicated but shrinking creator or influencer budgets in Nielsen’s 2026 survey.[49]
  • 88% of Snapchatters in Saudi Arabia consider creators’ social-media recommendations as trustworthy as recommendations from friends and family for electronics, in 2025.[50]
  • 93% of Snapchatters in Saudi Arabia follow influencers or creators specifically for electronics recommendations, according to a 2025 study.[50]
  • 64% of technology marketers globally reported dedicated and growing budgets for creator or influencer marketing in Nielsen’s 2026 survey.[49]

10 Statistics

Operations & Execution

Operational performance is reported with throughput and detection sensitivity targets, including 500,000 tablets or caplets per hour for Thermo Scientific APEX 500 Rx and 1,000 timestamped events retained by CEIA’s SDT industrial detector.

Process optimization in the metal detector industry

  • 500,000 tablets or caplets per hour is the stated throughput for Thermo Scientific’s APEX 500 Rx pharmaceutical metal detector.[13]
  • 230 performance and productivity-enhancing options are available on METTLER TOLEDO’s CM35 AdvancedLine combination system.[41]
  • 50% is the claimed sensitivity improvement for METTLER TOLEDO Profile Advantage technology in challenging product-effect applications.[51]
  • 7,500–8,000 pounds per hour is the average throughput reported for the dried-pasta facility using the Sentinel 4000D in 2026.[52]
  • 600 packs per minute is the stated maximum throughput for METTLER TOLEDO’s CM35 AdvancedLine combination system.[41]

Operational efficiency in the metal detector industry

  • 60 packs per minute is the pack rate shown in Sesotec’s documented INTUITY validation example.[53]
  • 100 packs per minute is the maximum application rate specified for the IQ3 retracting-band reject device.[54]
  • 100 packs per minute is the maximum application rate specified for the IQ3 pusher reject device.[54]
  • 1.742918% was the estimated false-reject rate in Sesotec’s documented validation example.[53]
  • 10 confirmed rejections out of 10 tests were recorded for each metal type in Sesotec’s example validation results.[53]

Quality management in the metal detector industry

  • 1.3–1.8 millimeters is the reported stainless-steel detection sensitivity achieved by Sesotec INTUITY with THiNK software at Loidl.[53]
  • 20 ECAC approvals are listed by CEIA for its aviation-security screening equipment.[16]
  • 92 patents originated from CEIA research in electromagnetic technologies, according to the company profile.[16]
  • 1.0–1.3 millimeters is the reported ferrous detection sensitivity achieved by Sesotec INTUITY with THiNK software at Loidl.[53]
  • 39 STAC certifications are listed by CEIA for its aviation-security screening equipment.[16]

Supply chain in the metal detector industry

  • Over 50 years of metal-detector research and production experience were reported by CEIA in its company profile.[16]
  • Three regional logistics hubs operated by METTLER TOLEDO were located in China, the Netherlands and the United States in 2024.[41]
  • Almost 450 direct-material suppliers were re-engaged by METTLER TOLEDO under its Responsible Sourcing Framework in 2024.[41]
  • 44% of METTLER TOLEDO’s direct-material spending went to strategic and preferred suppliers in 2024.[41]
  • 185 highly qualified production technicians worked at CEIA’s headquarters area, according to its company profile.[16]

Outsourcing / Offshoring in the electronics and semiconductors sector (sector benchmark)

  • Just 2.8% of foundational chips used by surveyed U.S. manufacturers came from Chinese-owned foundries in January 2024, although over two-thirds of respondents’ products contained at least one such chip.[55]
  • China- and Taiwan-based outsourced semiconductor assembly and test providers commanded roughly 80% of the global OSAT market in 2022.[5]
  • U.S. semiconductor firms outsourced 1.5% of their total chip output to China-based foundries in January 2024, according to a Bureau of Industry and Security survey.[55]
  • Over 80% of surveyed integrated device manufacturers used external production for some front-end fabrication in 2022, with foundries receiving an average 19.6% of product revenue.[56]
  • Approximately 60% of global semiconductor assembly, test and packaging was outsourced in 2022, while under 2% was performed in the United States.[56]

11 Statistics

Finance & Pricing

Margins and cost efficiency are central, including Minelab segment profit of $162.4 million in FY2026 and claims that Fortress multi-lane detector can save up to 65% of total cost of ownership.

Pricing strategy in the metal detector industry

  • Minelab expanded retail distribution across North America and Europe in FY2024, alongside Amazon and direct e-commerce channels, to broaden route-to-market coverage.[10]
  • Approximately 2× the Gold Monster 1000 price was the planned retail positioning for Minelab’s Gold Monster 2000 in FY2025, targeting a premium entry-level segment globally.[57]
  • Four new Minelab products launched in FY2026 across gold, recreational and countermine markets, supporting a product-led pricing strategy.[9]
  • Evolv’s annual recurring revenue reached $132.7 million by the end of Q2 2026, indicating a subscription-oriented pricing model for security-screening systems.[58]
  • Minelab restructured its European dealer model and optimized e-commerce channel offerings during FY2023 to expand market reach.[9]

Cost reduction in the metal detector industry

  • Approximately $15 million of Minelab inventory was reduced during FY2024 as supply chains normalized.[10]
  • Up to 65% of total cost of ownership could be saved by Fortress Technology’s multi-lane detector through lower maintenance and parts requirements.[59]
  • Minelab reduced freight expenses in FY2022 while passing price increases to customers to improve cost efficiency.[10]
  • $35,000 was the cited maximum annualized cost saving from choosing one in-line metal-detector make or model over another.[60]
  • Approximately 17% of installation cost could be saved using Fortress Technology’s multi-lane detector configuration.[59]

Profitability in the metal detector industry

  • 45% was Minelab’s segment profit margin in FY2026, up from 39% in FY2025.[9]
  • 46% was Minelab’s profit margin percentage in FY2022, up from 44% in FY2021.[10]
  • $162.4 million was Minelab’s segment profit in FY2026, up 65% from the prior corresponding period.[9]
  • 35% was Minelab’s segment profit margin in FY2024, compared with 32% in FY2023.[10]
  • 23.0% was Detection Technology’s rolling 12-month return on net assets in the first quarter of 2026.[61]

Financial planning in the metal detector industry

  • 15% was Minelab’s second-half FY2026 revenue growth compared with the first half, supporting Codan’s full-year planning outlook.[9]
  • 10%–15% was Codan’s FY2025 organic revenue-growth target for its Communications division, supporting group financial planning alongside metal detection.[9]
  • Four Minelab products were scheduled for release in FY2026 as part of Codan’s product-roadmap and growth planning.[10]
  • Approximately 50% of annual NPAT was Codan’s stated dividend-distribution policy in FY2024.[9]
  • Approximately 30% was Minelab’s guided first-half FY2023 segment profit margin, compared with 45% in first-half FY2022.[10]

12 Statistics

Product & Service

Service horizons and installed coverage are stated with long lifecycle signals, including Detectronic’s 15 to 20 years stated service horizon and 100-plus countries served by Detectronic installations.

Product development in the metal detector industry

  • 1986 was the founding year of Detectronic, which designs and manufactures food-industry metal-detection equipment.[62]
  • 30 years of innovation were reported by Minelab as the period over which it advanced handheld metal-detection technology.[10]
  • 3 new coin-and-treasure metal detectors were launched by Minelab at the end of the first half of FY2023.[9]
  • 120 product characteristics can be stored and recalled in Cassel’s METAL SHARK controller product library.[63]

Product lifecycle in the metal detector industry

  • 15 to 20 years is Detectronic’s stated service horizon for a customer specifying a food-industry metal detector.[62]
  • 5,000-plus Cassel metal detectors have been installed worldwide, according to the company’s METAL SHARK brochure.[64]
  • More than 40 countries had local technical service for Cassel equipment in the cited product documentation.[64]
  • 95% of Detectronic’s production is exported through international distributors and group companies.[62]
  • 2005 was the year VALLON introduced dual-sensor technology combining metal detection with ground-penetrating radar.[65]

After-sales in the metal detector industry

  • 3 group companies in India, China and Thailand support Detectronic’s international distributor network.[62]
  • 3 preventive-maintenance frequencies—annual, biannual and quarterly—are offered by Reliatech for metal-detector systems.[66]
  • 5,000-plus Cassel metal detectors are covered by the company’s worldwide technical-service network.[63]
  • 100-plus countries are served by Detectronic installations backed by its service and support organization.[62]
  • 600-plus dedicated product-inspection technicians support METTLER TOLEDO customers globally.[41]

Value proposition in the metal detector industry

  • A$262 million was Minelab’s FY2022 sales, its second-best year and 11% above FY2020.[10]
  • A$219.9 million was Minelab’s FY2024 revenue, representing 25% growth from the prior year.[10]
  • 45% was Minelab’s metal-detection segment profit margin in FY2026, up from 39% in the prior year.[9]
  • 35% was Minelab’s FY2024 segment profit margin, compared with 32% in FY2023.[10]
  • 15% was Minelab’s second-half FY2026 revenue growth compared with the first half, supported by successful product releases.[9]

13 Statistics

Sustainability & Ethics

Compliance and traceability coexist with sustainability targets, including CEIA’s PD240CBM specified 2 seconds startup time and METTLER TOLEDO’s 2030 Scope 1 and 2 reduction target of 70% versus 2018 baseline.

Sustainability in the metal detector industry

  • 2 seconds is the specified startup time for CEIA’s PD240CBM hand-held metal detector.[67]
  • More than 90% of Smiths Detection’s energy came from renewable resources in the latest company-reported period, globally.[29]
  • 6 internal audits per year are planned under Garrett Metal Detectors’ integrated quality, environmental and safety management system.[1]
  • 5 years is the formal recertification cycle stated for Garrett Metal Detectors’ ISO management-system certifications.[1]
  • 50-plus hours of battery life is specified for CEIA’s PD240CBM hand-held detector using two AA alkaline batteries.[67]

ESG in the metal detector industry

  • 1,000 events can be stored in CEIA’s SDT industrial metal detector for quality-control traceability.[67]
  • 70% is METTLER TOLEDO’s 2030 target for reducing absolute Scope 1 and 2 greenhouse-gas emissions from its 2018 base year.[41]
  • 30% is METTLER TOLEDO’s 2030 target for reducing selected absolute Scope 3 emissions from its 2019 base year.[41]
  • 1 environmental-management standard, ISO 14001:2015, covers Garrett’s design, manufacture, sales, distribution and service of security, industrial, military and consumer metal detectors.[1]
  • 3 ISO management standards—9001, 14001 and 45001—are held by Garrett Metal Detectors for quality, environmental and occupational-health management.[1]

Ethics in the metal detector industry

  • 1 formal Code of Business Ethics guides Smiths Detection’s ethical conduct and reporting of ethical concerns.[29]
  • 2 security levels—operator and supervisor—control programming access in CEIA’s SDT industrial metal detector.[67]
  • 1 FDA 21 CFR Part 11-compliant data-security, integrity and traceability framework is specified for CEIA’s THS/G21ET industrial detector series.[67]
  • 1,000 timestamped events can be retained by CEIA’s SDT industrial detector, supporting auditable quality-control records.[67]

CSR in the metal detector industry

  • 1 community-engagement program framework is used by Smiths Detection teams, with charitable-giving and volunteer activities reported at every location.[29]
  • 1 company-wide employee and community focus is identified by Smiths Detection as part of its social-sustainability program.[29]

Circular economy in the metal detector industry

  • 1 refurbished-equipment purchasing or rental model is offered by METTLER TOLEDO for some products and locations.[41]
  • 1 take-back and recycling offer is available in selected markets for METTLER TOLEDO products at end of life.[41]
  • 1 upgrade-kit offering for metal detectors is cited by METTLER TOLEDO as a way to extend equipment useful life.[41]
  • 1 refurbished-parts purchasing option is offered by METTLER TOLEDO for some products and locations.[41]
  • 1 EU WEEE-regulation coverage applies to most METTLER TOLEDO products, including product-inspection equipment such as metal detectors.[41]

Carbon footprint in the metal detector industry

  • 70% is METTLER TOLEDO’s 2030 absolute Scope 1 and 2 emissions-reduction target versus its 2018 baseline.[41]
  • 30% is METTLER TOLEDO’s 2030 absolute reduction target for specified Scope 3 emissions versus its 2019 baseline.[41]
  • More than 90% of Smiths Detection’s energy came from renewable sources in the company’s latest reported period, reducing operational-energy emissions exposure.[29]

15 Statistics

Globalization & Expansion

Channel and production footprint metrics emphasize international reach, including approximately 95% of Detectronic’s production exported in 2026 and Garrett authorized dealer network covering 120 countries in 2026.

Globalization in the metal detector industry

  • Approximately 95% of Detectronic’s production was exported through its international distributor network in 2026.[62]
  • More than 30,000 Detectronic metal-detector installations had been completed by 2026.[62]
  • More than 55 countries received Minelab countermine detectors manufactured in Adelaide in 2018.[10]
  • More than 85% of Codan’s sales are exports, covering its communications and metal-detection portfolios, in FY2023.[10]
  • Garrett authorized dealers operated in 120 countries for products manufactured at its Texas factory, according to the company’s current certification page.[1]

Supplier management in the metal detector industry

  • Supplier spending represented 29% in Europe in Codan’s FY2025 supplier-spend profile.[78]
  • Supplier spending represented 23% in North America in Codan’s FY2025 supplier-spend profile.[78]
  • Detectronic supported production and distribution through group companies in India, China and Thailand in 2026.[62]
  • Supplier spending in the Middle East was below 1% in Codan’s FY2025 supplier-spend profile.[78]
  • Elektral maintained cooperation with partners in the European Union, Germany, the United States, Asia and the Far East for OEM, ODM and co-production projects in 2025.[79]

Stakeholder management in the metal detector industry

  • Minelab opened a Dubai regional office in 2015 to better serve artisanal and small-scale gold miners in Africa.[80]
  • Detection Technology launched 60 flat-panel detector solutions for global sales in 2024.[12]
  • Detection Technology’s Security Business Unit grew net sales by 17.8% in 2024.[12]
  • XP Metal Detectors offered a five-year warranty for all its metal detectors in 2025.[81]
  • Detection Technology’s Asia-Pacific market represented 67.2% of its net sales in 2024.[12]

Distribution channels in the metal detector industry

  • Codan used regional distribution centres to shorten routes to market for products in FY2023.[10]
  • Ten global distribution-centre locations were listed for Codan’s supply chain in FY2023, including the UAE, United States, India, Netherlands and Australia.[10]
  • Minelab consumer revenue was split 37% for Asia-Pacific, 33% for Europe-Middle East-Africa and 30% for the Americas in the company overview.[82]
  • XP Metal Detectors sold through authorized resellers and distributors in more than 50 countries in 2025.[81]
  • Garrett’s authorized dealer network covered 120 countries in 2026.[1]

Key questions about the metal detector industry

What is the global metal detectors market size in 2025?
The global metal detectors market is estimated at $1.8 billion in 2025 by Mordor Intelligence.
How fast is the metal detectors market expected to grow to 2030?
Mordor Intelligence forecasts growth to $2.77 billion by 2030, implying a 9.05% CAGR from 2025 to 2030.
Which companies lead the metal detector industry?
Codan leads Gitnux's 2026 metal detector ranking with an Overall score of 9.1, driven by Minelab revenue of $362M in FY2026. Nokta Detectors is the runner-up at 8.7, with exports to more than 100 countries from detectors manufactured in Istanbul.
What technology shifts are most visible in 2026 system deployments?
AI-based approaches are appearing in security screening, including Garrett’s Clarity platform and Paragon walk-through features. Industrial deployments also report large installed bases, such as 70,000 Anritsu industrial metal-detector units installed worldwide by February 2026.
How is the market structured by detector type and application?
The market spans walk-through and handheld detectors, ground-search equipment, and industrial conveyor-based systems. Applications include security screening, food processing, mining, archaeology, military, and recreational treasure hunting.
What regulatory standards affect detector use in aviation and meat programs?
In U.S. aviation security, aircraft operators may use metal-detection devices only when authorized under an approved security program and the devices must meet TSA calibration standards. In USDA meat programs, approved detectors must identify metallic contaminants and may require testing with a 3.0 mm stainless-steel test strip for inline systems.
Reference

Cite This Report

This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.

APA
Samuel Norberg. (2026, November 10). Metal Detector Industry Statistics. Gitnux. https://gitnux.org/metal-detector-industry-statistics
MLA
Samuel Norberg. "Metal Detector Industry Statistics." Gitnux, 10 Nov 2026, https://gitnux.org/metal-detector-industry-statistics.
Chicago
Samuel Norberg. 2026. "Metal Detector Industry Statistics." Gitnux. https://gitnux.org/metal-detector-industry-statistics.

Sources & references

96 sources cited across this report

  1. garrett.com
  2. sec.gov
  3. pub-mediabox-storage.rxweb-prd.com
  4. spnews.com
  5. deloitte.com
  6. euagenda.eu
  7. eur-lex.europa.eu
  8. ec.europa.eu
  9. financialfilings.com
  10. codan.com.au
  11. company-announcements.afr.com
  12. deetee.com
  13. thermofisher.com
  14. fortresstechnology.com
  15. kenweigroup.com
  16. exhibitorsearch.messefrankfurt.com
  17. mdpi.com
  18. businesswire.com
  19. manufacturingleadershipcouncil.com
  20. ismworld.org
  21. mordorintelligence.com
  22. theinsightpartners.com
  23. usa.minelab.com
  24. csmetaldetectors.com
  25. prnewswire.com
  26. powderbulksolids.com
  27. indus.eu
  28. recyclemetals.org
  29. smithsdetection.com
  30. wg-plc.com
  31. securetechvs.com
  32. libertydefense.com
  33. mb.cision.com
  34. data.fca.org.uk
  35. cityandguilds.com
  36. newsroom.cisco.com
  37. naceweb.org
  38. metallus.com
  39. investor.asml.com
  40. processingmagazine.com
  41. mt.com
  42. questmetaldetectors.com
  43. paulcee.co.uk
  44. sprites.ai
  45. detecthistory.com
  46. linkedin.com
  47. rodek.app
  48. historyseekers.net
  49. brand-news.it
  50. assets.ctfassets.net
  51. api.stabilengineering.com
  52. documents.thermofisher.com
  53. sesotec.com
  54. ppnfiles.s3-ap-southeast-2.amazonaws.com
  55. uscc.gov
  56. media.bis.gov
  57. mcxtend.com
  58. seekingalpha.com
  59. provisioneronline.com
  60. flodyn.com
  61. mfn.se
  62. detectronic.dk
  63. kssonlineanalyzers.com
  64. segman.com
  65. en.wikipedia.org
  66. reliatech.net
  67. ceia.net
  68. s202.q4cdn.com
  69. integratedinsights.org
  70. assets.kpmg.com
  71. scmr.com
  72. wtwco.com
  73. sans.org
  74. capgemini.com
  75. trustarc.com
  76. itpro.com
  77. mckinsey.com
  78. minelab.com
  79. elektral.com
  80. parts.minelab.com
  81. xpmetaldetectors.com
  82. marketindex.com.au
  83. 360iresearch.com
  84. pmarketresearch.com
  85. ams.usda.gov
  86. govinfo.gov
  87. ftp.noktadetectors.com
  88. ishidaeurope.com
  89. minebea-intec.com
  90. eriez.com
  91. multivac.com
  92. bizerba.com
  93. tsa.gov
  94. gold.org
  95. grandviewresearch.com
  96. dhs.gov