01 Industry overview
The industrial heat pump industry at a glance
Industrial heat pumps remain a niche but expanding decarbonisation technology: Japan had nearly 650 MW of installed industrial heat-pump capacity in 2024, while global deployment is below 1% of light-industry heat demand in 2025.
- 650 MW[6]
- Japan capacity, 2024
- <1%[6]
- Light-industry heat share, 2025
- 8%[6]
- Light-industry heat share, 2035 STEPS
- 32%[6]
- Industrial electrification target
- Forecast & CAGR
- The IEA projects industrial heat-pump deployment in the Stated Policies Scenario to reach around 8% of light-industry heat demand by 2035, compared with below 1% in 2025. Under the Net Zero Emissions by 2050 Scenario, deployment reaches around 20% of light-industry heat demand by 2035.[6]
- Market share & regions
- Japan is among the leading industrial heat-pump markets, with nearly 650 MW of installed capacity in 2024, equivalent to around 1% of its light-industrial heat demand. Europe is also advancing industrial applications through the EU Clean Industrial Deal and national district-heating and industrial-efficiency programmes, while China leads global heat-pump manufacturing capacity.[6]
- Segmentation
- The addressable market is concentrated in low- and medium-temperature industrial process heat, which commercially available systems could technically supply for up to around 20% of global industrial heat demand. Applications include process heating, waste-heat recovery and district heating, while systems are differentiated by heat source, temperature level and system scale.[6]
- Key players & concentration
- The value chain is concentrated in specialised components rather than a single dominant industrial heat-pump manufacturer. In Europe, leading component and equipment companies include Danfoss, Bitzer, Copeland, GEA, Alfa Laval, Kelvion, Güntner, CAREL and LU-VE Group; China dominates mass-market heat-pump production and has a vertically integrated manufacturing base with estimated levelised costs 35–50% below other regions.[10][6]
- Trends, drivers & challenges
- Industrial heat pumps are driven by industrial electrification, decarbonisation incentives, waste-heat utilisation and energy-security objectives. Deployment remains limited because industrial installations require integration with existing production systems, have long asset lifetimes and can face unfavourable electricity-to-gas economics; the IEA identifies grid connections, policy support and energy prices as key constraints.[6]
- Consumer behavior & competition
- Industrial buyers are primarily evaluating total operating economics, process integration and emissions performance rather than standardised equipment alone. Competition is shaped by China’s cost-competitive manufacturing base, Europe’s strength in high-value large-capacity and high-efficiency units, and specialised suppliers of compressors, heat exchangers and natural-refrigerant systems.[6][10]
- Regulation
- Regulation is increasingly affecting refrigerant selection and project economics. The EU is phasing down high-global-warming-potential fluorinated gases under its F-gas Regulation and shifting toward natural refrigerants including propane, carbon dioxide and ammonia; the IEA also identifies industrial energy-efficiency plans, waste-heat incentives and streamlined grid connections as effective deployment policies.[10][6]
- Latest news
- The IEA’s 2026 Heat Pump Monitor reports that industrial heat-pump deployment remains limited but identifies stronger industrial electrification measures and decarbonisation incentives as capable of raising heat-pump coverage to around 8% of light-industry heat demand by 2035. The IEA also estimates industrial heat-pump capacity for 2025 as part of its electrification analysis.[6]
02 Ranking
Top 10 Companies in the Industrial Heat Pump Industry
The leading companies in the industrial heat pump industry, ranked on market impact, performance, momentum, innovation and brand popularity.
Updated November 18, 2026 · Next review December 18, 2026
Johnson Controls stands out for Sabroe industrial heat pumps for higher temperatures because Sabroe has supplied high-temperature and high-capacity industrial heat pumps since 1982, while Daikin Industries focuses on industrial heat-pump and HVAC systems because it develops and manufactures industrial HVAC systems, compressors and refrigerants.
Ranked by Overall score · How we score ↓
Editor's top 3 picks
Where to start, by need.
#1 Overall · Leader in industrial heat pumps
Johnson Controls
IE
Ranked #1 · 9.0 · Industrial heat pumps
Why we picked it: It supplies Sabroe industrial heat pumps aimed at higher temperature industrial process heat.
#2 overall
Daikin Industries
JP
Ranked #2 · 8.9 · Industrial heat pumps
Why we picked it: Its industrial HVAC and heat-pump focus includes compressors and refrigerants used across system designs.
#3 overall
Siemens Energy
DE
Ranked #3 · 8.9 · Industrial heat pumps
Why we picked it: It targets large industrial heat-pump projects where process temperatures drive system design choices.
Pick 1 is the #1 company overall. No other segment places in the top 5, so picks 2 and 3 follow rank.
Full ranking
| # | Company | Overall ↓ | Impact | Performance | Momentum | Innovation | Company snapshot |
|---|---|---|---|---|---|---|---|
| 1 | Johnson Controls Industrial heat pumps · IE | 9.0 | 9.6 | 7.9 | 8.7 | 9.1 | |
Company snapshot · Johnson Controls · Data as of November 18, 2026 Sabroe has supplied high-temperature and high-capacity industrial heat pumps since 1982.[11]
| |||||||
| 2 | Daikin Industries Industrial heat pumps · JP | 8.9 | 9.9 | 8.1 | 9.3 | 8.0 | |
Company snapshot · Daikin Industries · Data as of November 18, 2026 Daikin develops and manufactures heat pumps, industrial HVAC systems, compressors and refrigerants.[12]
| |||||||
| 3 | Siemens Energy Industrial heat pumps · DE | 8.9 | 9.3 | 8.9 | 9.9 | 7.5 | |
Company snapshot · Siemens Energy · Data as of November 18, 2026 Siemens Energy supplies large industrial heat-pump systems reaching high process temperatures.[13]
| |||||||
| 4 | Everllence Industrial heat pumps · DE | 8.8 | 9.0 | 8.8 | 9.3 | 8.0 | |
Company snapshot · Everllence · Data as of November 18, 2026 Everllence develops and builds industrial heat pumps at its Oberhausen production site.[14]
| |||||||
| 5 | Mayekawa Industrial heat pumps · JP | 8.7 | 8.4 | 9.9 | 8.1 | 9.1 | |
Company snapshot · Mayekawa · Data as of November 18, 2026 Mayekawa offers Unimo, Plus+HEAT and EcoCircuit industrial heat-pump systems.[15]
| |||||||
| 6 | Alfa Laval Industrial heat-pump heat exchangers and systems · SE | 8.5 | 8.4 | 8.8 | 9.3 | 7.4 | |
Company snapshot · Alfa Laval · Data as of November 18, 2026 Alfa Laval supplies heat-exchanger technology for industrial heat-pump systems and large heat-recovery projects.[16]
| |||||||
| 7 | AtmosZero Electrified industrial steam heat pumps · US | 8.5 | 7.0 | 8.2 | 9.7 | 9.9 | |
Company snapshot · AtmosZero · Data as of November 18, 2026 AtmosZero makes modular heat pumps that convert ambient air into emissions-free industrial steam.[17]
| |||||||
| 8 | Mitsubishi Heavy Industries Industrial air-to-water heat-pump systems · JP | 8.3 | 8.4 | 7.2 | 9.0 | 8.6 | |
Company snapshot · Mitsubishi Heavy Industries · Data as of November 18, 2026 MHI offers industrial heat pumps for large-volume hot-water supply and process reheating.[18]
| |||||||
| 9 | Fuji Electric Industrial steam-generating heat pumps · JP | 8.2 | 7.6 | 8.8 | 9.1 | 7.0 | |
Company snapshot · Fuji Electric · Data as of November 18, 2026 Fuji Electric supplies Steam Gen HP industrial heat-pump technology.[15]
| |||||||
| 10 | Atlas Copco Industrial heat pumps, MVR and steam systems · SE | 8.2 | 9.1 | 7.9 | 7.0 | 7.8 | |
Company snapshot · Atlas Copco · Data as of November 18, 2026 Atlas Copco supplies closed-loop industrial heat pumps and open-loop MVR systems.[19]
| |||||||
How we score
- Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
- Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
- Momentum (20%): growth trajectory and future potential.
- Innovation (15%): R&D intensity and how technologically advanced the company is.
Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.
Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.
Cadence Recalculated when new figures are published; next review December 18, 2026.
Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.
Cite this ranking
APA
Samuel Norberg. (2026, November 18). Top 10 companies in the industrial heat pump industry. In Industrial Heat Pump Industry Statistics. Gitnux. https://gitnux.org/industrial-heat-pump-industry-statistics/#top-companies
Installed capacity of large heat pumps in district heating and cooling networks (European Union)
Sweden leads with 1.2 GW.
03 Trends & forecasts
Top 10 Industrial Heat Pump Industry Trends & Forecasts 2027
What is changing in the industrial heat pump industry, with the evidence behind each trend and a forecast for 2027.
Forecasts were generated by an AI model from the cited evidence. They are estimates, not guarantees.
01Industrial uptake accelerates from niche
High confidenceIndustrial heat pumps covered below 1% of light-industry heat demand in 2025, while Japan had nearly 650 MW of installed industrial heat-pump capacity in 2024. Commercially available systems could technically supply up to around 20% of global industrial heat demand, mainly in low- and medium-temperature applications.[6]
Forecast 2027: Industrial deployment will remain a small share of total industrial heat in 2027, but project announcements and installed capacity should grow faster than the wider heat-pump market. Growth will be concentrated in food, beverages, paper, chemicals and other light industries.
02Light-industry penetration moves toward 8%
High confidenceThe IEA estimates that stronger electrification measures and industrial decarbonisation incentives could raise heat-pump coverage from below 1% of light-industry heat demand in 2025 to around 8% by 2035 in the Stated Policies Scenario.[6]
Forecast 2027: By 2027, coverage is likely to remain near the low-single-digit range globally, but the market should be on a clearly rising trajectory toward the 2035 STEPS level. Annual additions will be strongest where industrial incentives and electricity pricing are already supportive.
03Low-temperature processes dominate demand
High confidenceThe IEA reports that commercially available heat pumps can address mainly low- and medium-temperature industrial processes, with systems below 120°C already in commercial operation and systems below 160°C beginning commercial deployment. In less energy-intensive industries, around one-third of process-heat demand is technically suitable for electrification using heat pumps below 200°C.[6]
Forecast 2027: In 2027, most new capacity will continue to serve heat below 160°C rather than high-temperature heavy-industry applications. Suppliers will increasingly package heat pumps for specific process ranges instead of marketing one general-purpose industrial product.
04High-temperature systems commercialise gradually
High confidenceIndustrial heat pumps below 160°C are entering commercial operation, while systems for 201–400°C and above remain mainly at demonstration, prototype or concept stage. A U.S. Department of Energy presentation reported more than 120 high-temperature heat pumps implemented internationally but only a few steam-generating heat-pump installations.[6]
Forecast 2027: 2027 should bring more commercial projects in the 120–160°C range, especially for steam, drying and evaporation. Above 160°C, demonstrations will expand but will not yet materially displace conventional boilers across most sectors.
05Waste-heat recovery strengthens project economics
High confidenceIndustrial heat pumps can recover waste or ambient heat and upgrade it for industrial processes. The IEA identifies food, beverages, textiles, chemicals, paper and other manufacturing sectors as immediate opportunities for electrification because commercially available technologies can meet much of their low-temperature heat demand.[6]
Forecast 2027: In 2027, projects with a nearby and stable waste-heat source will continue to secure investment earlier than projects relying on ambient air or large new electrical connections. Heat-recovery integration will become a standard part of industrial energy audits and project design.
06Thermal storage adds flexibility value
High confidenceThe IEA states that industrial heat electrification integrated with thermal storage can create demand flexibility and support higher shares of variable renewable generation. It also reports that many industrial processes can shift electricity use through automation or thermal storage.[6]
Forecast 2027: By 2027, more large heat-pump proposals will include hot-water, steam or other thermal-storage capacity, particularly where electricity prices vary by hour. Storage will increasingly be justified as both a cost-control measure and a way to reduce grid-connection constraints.
07Electricity-to-gas economics remain decisive
High confidenceThe IEA says operating costs and energy prices largely determine lifetime competitiveness, with high electricity taxes and levies weakening the case for heat pumps even when efficiency is superior. Its 2025 analysis assesses industrial heat-pump competitiveness against gas boilers using regional electricity-to-fossil-fuel price ratios.[6]
Forecast 2027: In 2027, adoption will remain geographically uneven: projects in regions with moderate electricity prices, high gas costs, high load factors or combined heating and cooling will proceed fastest. Uneven power taxation will continue to delay otherwise technically viable projects.
08Grid access becomes a binding constraint
High confidenceThe IEA identifies secure grid connection as a major obstacle for industrial heat-pump projects, which can require connection upgrades for additional electrical load. Its Electricity 2026 report says a lack of grid capacity is emerging as a critical bottleneck and that connection queues have reached record levels worldwide.[6]
Forecast 2027: In 2027, projects with on-site generation, flexible operation or thermal storage will have an advantage in congested markets. Developers will increasingly pursue non-firm connections, demand-response arrangements and phased capacity increases rather than relying only on conventional firm connections.
09China retains manufacturing cost leadership
High confidenceGlobal heat-pump manufacturing capacity was roughly 145 GW per year in 2024, with China accounting for around 35%. The IEA estimates that China’s vertically integrated manufacturing base produces heat pumps at levelised costs 35–50% below those in other regions.[6]
Forecast 2027: In 2027, Chinese suppliers will remain the main source of cost pressure in standardised equipment and components. European and North American manufacturers will compete more through large custom systems, efficiency, controls, service and compliance rather than lowest upfront price.
10Compressor supply stays concentrated
Medium confidenceThe IEA reports that key upstream components, notably rotary compressors, are mostly produced in China, leaving the supply chain exposed to disruption risks. Global manufacturing capacity is large, but the IEA says sustained demand is needed to justify further investment in automation and supply-chain integration.[6]
Forecast 2027: In 2027, compressor availability and lead times will remain strategically important, especially as industrial, commercial and residential heat-pump demand compete for similar components. Manufacturers will increase dual sourcing and regional assembly, but meaningful diversification will take longer.
04 Statistics
Market Intelligence
Market value estimates differ by scope: US$605 million in 2024 for waste-heat recovery and upgrade systems, US$10.10 billion in 2024 for process heating, cooling and drying.
Market size, volume and shipments in the industrial heat pump industry
- US$605 million was the global industrial heat pump market value in 2024, covering systems that recover and upgrade industrial waste heat; Stats Market Research estimate.[1]
- US$2 billion was the global industrial heat pump market value in 2023, covering industrial process-heating equipment; IEEFA estimate, with no newer comparable figure identified in that source.[2]
- US$10.10 billion was the global industrial heat pump market value in 2024, covering systems used for industrial process heating, cooling and drying; Maximize Market Research estimate.[3]
05 Statistics
Production & Operations
The operating base in Japan remains a reference point, with nearly 650 MW of installed industrial heat-pump capacity serving light-industrial heat demand in 2024.
Installed base and productive capacity in industrial heat pump
- 21 manufacturers marketed heat pumps for industrial process heating in the United States, covering food, pharmaceuticals, textiles, chemicals and printing applications.[4]
- 28 industrial-heat-pump manufacturers were identified across Europe: 17 in the EU, 8 in Norway and 3 non-European manufacturers based in Japan.[5]
- Nearly 650 MW of installed industrial heat-pump capacity was operating in Japan in 2024, measured as thermal capacity serving light-industrial heat demand.[6]
06 Statistics
People & Workforce
China’s heat-pump employment is measured at broader category levels, with approximately 140,000 people employed in 2024 across the broader heat-pump industry.
Employment and hiring in the industrial heat pump industry
- 35,000 people worked in production of heat-pump main units in China in 2024, within the broader heat-pump industry rather than an industrial-heat-pump-only classification.[7]
- 25,000 people worked in heat-pump component production in China in 2024, a broader parent-category measure covering components used across heat-pump applications.[7]
- Approximately 140,000 people were employed in China’s heat-pump industry in 2024; the source covers the broader heat-pump industry, because no industrial-heat-pump employment series was identified.[7]
07 Statistics
Trade & Footprint
Heat-pump trade shows contraction from 2023 to 2024, with global heat-pump exports falling from EUR 5.6 billion to EUR 3.9 billion in 2024.
Imports and exports of industrial heat pump
- EUR 3.9 billion was the value of global heat-pump exports in 2024, down from EUR 5.6 billion in 2023; classification: international trade data for heat pumps, with industrial and non-industrial units combined.[8]
- EUR 654 million of extra-EU heat-pump imports were recorded in 2024, nearly half the 2023 level; classification: Eurostat Prodcom 28251380 and related COMEXT heat-pump codes; physical volume was not reported.[8]
- EUR 539 million of extra-EU heat-pump exports were recorded in 2024, down 22% year on year; classification: Eurostat Prodcom 28251380 and related COMEXT heat-pump codes; industrial use is not separately identified.[8]
- EUR 115 million was the EU’s extra-EU heat-pump trade deficit in 2024; classification: Eurostat COMEXT heat-pump trade data, with industrial and non-industrial applications combined.[8]
08 Statistics
Regulation & Risk
F-gas regulation sets multiple EU deadlines, including revised leak-check rules from 23 July 2026 and market placing restrictions beginning 1 January 2027.
Regulations and compliance for industrial heat pump
- From 1 January 2033, EU Regulation (EU) 2024/573 prohibits placing on the market split systems above 12 kW containing F-gases with GWP of 150 or more, subject to safety exceptions.[5]
- From 1 January 2027, EU Regulation (EU) 2024/573 prohibits placing on the market self-contained heat pumps above 12 kW and up to 50 kW containing F-gases with GWP of 150 or more, subject to safety exceptions.[5]
- From 23 July 2026, Commission Implementing Regulation (EU) 2026/1444 applies revised F-gas leak-check rules to refrigeration, air-conditioning and heat-pump systems in the EU.[9]
- From 1 January 2027, EU Regulation (EU) 2024/573 prohibits placing on the market self-contained heat pumps up to 12 kW containing F-gases with GWP of 150 or more, subject to safety exceptions; scope includes industrial heat-pump equipment where covered.[5]
Key questions about the industrial heat pump industry
What is the estimated value of the global industrial heat-pump market?
How fast is industrial heat-pump deployment expected to grow through 2035?
Which companies lead the industrial heat pump industry?
What technology and integration shifts matter most for industrial heat pumps?
How is the market structured across manufacturers and components?
What regulatory changes affect industrial heat-pump projects in the EU?
Cite This Report
This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.
Samuel Norberg. (2026, November 18). Industrial Heat Pump Industry Statistics. Gitnux. https://gitnux.org/industrial-heat-pump-industry-statistics
Samuel Norberg. "Industrial Heat Pump Industry Statistics." Gitnux, 18 Nov 2026, https://gitnux.org/industrial-heat-pump-industry-statistics.
Samuel Norberg. 2026. "Industrial Heat Pump Industry Statistics." Gitnux. https://gitnux.org/industrial-heat-pump-industry-statistics.
Sources & references
19 sources cited across this report
statsmarketresearch.com
ieefa.org
maximizemarketresearch.com
docs.cpuc.ca.gov
eur-lex.europa.eu
iea.org
irena.org
publications.jrc.ec.europa.eu
climate.ec.europa.eu
- feps-europe.eu
latam.johnsoncontrols.com
daikin.com
betterbuildingssolutioncenter.energy.gov
everllence.com
mn.gov
alfalaval.com
- atmoszero.energy
mhi.com
atlascopco.com
