01 Industry overview
The feed milling industry at a glance
Global feed production reached an estimated 1.44 billion metric tons in 2025, up 2.9% year over year, as poultry and aquaculture supported growth while disease, input costs and regional livestock cycles constrained some markets.
- 1.44B mt[2]
- Global production, 2025
- 2.9%[2]
- Production growth, 2025
- 65.2%[2]
- Top 10 countries' share, 2025
- 400.4M mt[2]
- Broiler feed production, 2025
- Market size
- Global feed production was estimated at 1.44 billion metric tons in 2025, based on a survey covering 142 countries and 38,837 feed mills. Asia produced 559.3 million metric tons, making it the largest regional market.[2]
- Forecast & CAGR
- A 2026 industry forecast estimates global feed output at about 1.47 billion metric tons, compared with 1.44 billion metric tons in 2025. The same outlook estimates approximately 3.8% compound annual growth in volume from 2016 to 2025; the forecast should be treated as directional because market-value and scope definitions vary.[13]
- Market share & regions
- Asia accounted for 559.3 million metric tons of feed production in 2025, followed by North America at 288.6 million metric tons. China, the United States and Brazil together represented 47.7% of global output, while the top 10 producing countries accounted for 65.2%.[2]
- Segmentation
- Broiler feed was the largest reported species segment in 2025 at 400.4 million metric tons, followed by pig feed at 380.9 million metric tons and layer feed at 180.1 million metric tons. Aquaculture feed reached 55.5 million metric tons and grew 4.7%, the fastest growth among the major listed segments.[2]
- Key players & concentration
- The leading producing countries were China at 330.1 million metric tons, the United States at 267.4 million and Brazil at 89.9 million in 2025. These three countries accounted for 47.7% of global feed tonnage, indicating substantial geographic concentration even though production is distributed across 38,837 mills.[2]
- Pricing
- Feed costs remain closely linked to grain and protein-meal prices. In the United States, USDA's 2025 Dairy Margin Coverage data recorded monthly corn prices ranging from $3.93 to $4.64 per bushel and soybean-meal prices from $259.10 to $330.87 per ton.[14]
- Trends, drivers & challenges
- Growth in 2025 was driven more by productivity gains, structural shifts and greater use of commercial feed than by herd expansion. Key constraints included avian influenza and other disease outbreaks, volatile grain prices, currency movements, livestock-cycle changes and sustainability pressures.[2]
- Consumer behavior & competition
- Price-sensitive consumers and rising demand for affordable animal protein supported poultry and aquaculture feed growth in Asia in 2025. The market is also shifting from on-farm mixing toward commercial feed, particularly in China, increasing the role of industrial mills and formulation technology.[2]
- M&A
- Consolidation continues through regional acquisitions and capacity investments. In October 2026, Central Valley Ag announced that it bought into RJ Feed Milling's Nebraska facility and began operating it as Howells Milling, expanding manufacturing capacity in a growing livestock region.[15]
- Regulation
- In the European Union, Regulation (EC) No 1831/2003 establishes the authorization, marketing, labeling and use rules for feed additives and premixtures. Only additives that have completed the authorization process may be placed on the EU market and used in feed.[12]
02 Ranking
Top 9 Companies in the Feed Milling Industry
The leading companies in the feed milling industry, ranked on market impact, performance, momentum, innovation and brand popularity.
Updated November 21, 2026 · Next review December 21, 2026
Cargill stands out for global animal feed scale because it recorded 17.5 million tonnes in 2025, while Nutreco is the pick for aquafeed-related nutrition focuses on global animal nutrition and aquafeed through its feed businesses.
Ranked by Overall score · How we score ↓
Editor's top 3 picks
Where to start, by need.
#1 Overall · Leader in animal feed and nutrition
Cargill
US
Ranked #1 · 9.6 · Animal feed and nutrition
Why we picked it: It produced 17.5 million tonnes of feed in 2025 and is tied for No. 7 among global feed producers.
Leader in aquaculture nutrition
Nutreco
NL
Ranked #2 · 9.1 · Aquaculture nutrition
Why we picked it: It operates globally in animal nutrition and aquafeed through its feed businesses.
Leader in compound feed & premixes
De Heus Animal Nutrition
NL
Ranked #4 · 8.9 · Compound feed & premixes
Why we picked it: It produces compound feed, premixes, concentrates, and feed specialties for international markets.
Pick 1 is the #1 company overall. Picks 2 and 3 are the highest-ranked companies in the top 5 that add a new segment.
Full ranking
| # | Company | Overall ↓ | Impact | Performance | Momentum | Innovation | Company snapshot |
|---|---|---|---|---|---|---|---|
| 1 | Cargill Animal feed and nutrition · US | 9.6 | 9.9 | 9.2 | 9.0 | 9.9 | |
Company snapshot · Cargill · Data as of November 21, 2026 Cargill tied for No. 7 among global feed producers, with 17.5 million tonnes in 2025.[17]
| |||||||
| 2 | Nutreco Aquaculture nutrition · NL | 9.1 | 8.3 | 9.9 | 9.5 | 9.9 | |
Company snapshot · Nutreco · Data as of November 21, 2026 Nutreco operates globally in animal nutrition and aquafeed through its feed businesses.[18]
| |||||||
| 3 | Land O'Lakes Animal feed and nutrition · US | 8.9 | 8.4 | 9.9 | 8.8 | 9.2 | |
Company snapshot · Land O'Lakes · Data as of November 21, 2026 Land O'Lakes ranked No. 9 among global feed producers in the 2026 ranking.[17]
| |||||||
| 4 | De Heus Animal Nutrition Compound feed & premixes · NL | 8.9 | 8.4 | 8.9 | 9.4 | 9.2 | |
Company snapshot · De Heus Animal Nutrition · Data as of November 21, 2026 De Heus produces compound feed, premixes, concentrates and feed specialties internationally.[19]
| |||||||
| 5 | ForFarmers Compound feed & premixes · NL | 8.8 | 7.7 | 9.1 | 9.9 | 9.2 | |
Company snapshot · ForFarmers · Data as of November 21, 2026 ForFarmers' 2025 annual report identifies compound feed as a core operating metric.[20]
| |||||||
| 6 | Charoen Pokphand Foods Integrated feed, livestock and food production, global · TH | 8.5 | 8.3 | 7.9 | 9.0 | 9.2 | |
Company snapshot · Charoen Pokphand Foods · Data as of November 21, 2026 CP Group, including CPF operations, tied for No. 7 among 2025 global feed producers.[17]
| |||||||
| 7 | Muyuan Foods Pig-integrated feed production, China · CN | 8.5 | 8.9 | 8.8 | 7.6 | 8.4 | |
Company snapshot · Muyuan Foods · Data as of November 21, 2026 Muyuan maintained the No. 3 position in the 2026 global feed-company ranking.[17]
| |||||||
| 8 | ADM Complete feed, premixes and animal nutrition, global · US | 8.1 | 9.1 | 7.0 | 7.0 | 7.0 | |
Company snapshot · ADM · Data as of November 21, 2026 ADM produces about 3 million tonnes of feed annually across more than 50 plants.[21]
| |||||||
| 9 | Wens Foodstuff Group Poultry, swine and feed production, China · CN | 7.5 | 7.0 | 7.8 | 7.7 | 7.1 | |
Company snapshot · Wens Foodstuff Group · Data as of November 21, 2026 Wens ranked No. 5 among global feed producers based on 2025 output.[17]
| |||||||
How we score
- Impact (30%): scale and weight in the market (revenue, market share, employees, market position).
- Performance (20%): recent revenue growth and operating margin; an analyst assessment where a company does not publish them.
- Momentum (20%): growth trajectory and future potential.
- Innovation (15%): R&D intensity and how technologically advanced the company is.
Popularity (brand search demand, 15%) counts toward Overall but is not published as a column. Overall leaves out what is not known.
Scale Scores are shown on a 7–10 scale with one decimal; bars start at 7.0.
Cadence Recalculated when new figures are published; next review December 21, 2026.
Independence. Rankings are editorially independent. Scores, ranks, picks and the verdict follow the method above; no company can pay to change them.
Cite this ranking
APA
Samuel Norberg. (2026, November 21). Top 9 companies in the feed milling industry. In Feed Milling Industry Statistics. Gitnux. https://gitnux.org/feed-milling-industry-statistics/#top-companies
Revenue of the largest feed milling companies
Cargill leads with $154.0B in annual revenue (group level, converted to USD).
03 Trends & forecasts
Top 10 Feed Milling Industry Trends & Forecasts 2027
What is changing in the feed milling industry, with the evidence behind each trend and a forecast for 2027.
Forecasts were generated by an AI model from the cited evidence. They are estimates, not guarantees.
01Global output continues moderate growth
High confidenceGlobal feed production reached 1.440 billion metric tons in 2025, increasing 2.9% year over year across 142 countries and 38,837 mills. Asia produced 559.3 million metric tons, the largest regional total. ([alltech.com](https://www.alltech.com/press-release/2026-alltech-agri-food-outlook-shares-global-feed-production-survey-data?trk=article-ssr-frontend-pulse_little-text-block&utm_source=openai))[2]
Forecast 2027: Global output is likely to rise to roughly 1.47–1.49 billion metric tons in 2027, implying low- to mid-single-digit growth led by poultry, aquaculture and greater commercial-feed penetration. Growth should remain uneven because livestock cycles, disease and input costs will limit expansion in some markets.
02Poultry remains the volume anchor
High confidenceBroiler feed was the largest reported species segment in 2025 at 400.4 million metric tons, while poultry benefited from demand for relatively affordable animal protein. The 2025 global feed survey also identified poultry as the dominant sector by tonnage. ([alltech.com](https://www.alltech.com/press-release/2026-alltech-agri-food-outlook-shares-global-feed-production-survey-data?trk=article-ssr-frontend-pulse_little-text-block&utm_source=openai))[2]
Forecast 2027: Broiler and layer feed should continue to provide the largest absolute contribution to global mill volumes in 2027. Growth is likely to be approximately 2–4%, with gains concentrated in Asia, Latin America and recovering egg markets.
03Feed costs remain commodity-sensitive
High confidenceUSDA projected a 2026/27 market-year average corn price of $4.50 per bushel, compared with $4.15 in 2025/26. Purdue University’s 2026 analysis also indicated that corn prices could exceed $5 per bushel during late 2026 and throughout 2027, while soybean-meal prices were expected to remain near long-run averages. ([fsa.usda.gov](https://www.fsa.usda.gov/sites/default/files/2026-09/2026_MYA.pdf?utm_source=openai))[14][22]
Forecast 2027: Ingredient costs should remain a major margin risk in 2027, with corn more volatile than soybean meal. Mills are likely to increase forward purchasing, reformulation, alternative-grain use and customer pricing mechanisms tied to raw-material indices.
04Disease keeps poultry demand volatile
High confidenceUSDA reported that the US egg industry lost 41.8 million laying hens to highly pathogenic avian influenza in 2025. Separately, USDA APHIS confirmed 200 HPAI detections in 37 states during January–March 2026, including commercial poultry premises. ([ers.usda.gov](https://www.ers.usda.gov/media/20857/ldp-m-380.pdf?v=87072&utm_source=openai))[23][24]
Forecast 2027: Disease-related volatility will remain a significant 2027 risk for layer, turkey and broiler feed demand. Mills should continue strengthening biosecurity, inventory flexibility and species diversification rather than relying on uninterrupted poultry expansion.
05Feed mills adopt AI and automation
Medium confidenceA 2026 feed-mill technology conference identified AI, automation and mobile digital tools as emerging operational priorities. NC State researchers are also developing sensor-and-AI systems that analyze ingredients in real time to adjust formulations batch by batch. ([feedandgrain.com](https://www.feedandgrain.com/feed-mill-of-the-future/article/15818428/5-tech-trends-defining-the-next-era-of-feed-mill-operations?utm_source=openai))[15][25]
Forecast 2027: By 2027, larger mills and digitally capable independent mills should expand use of automated batching, predictive maintenance, machine vision and precision formulation. Adoption will be gradual because integration costs, data quality and workforce capability remain constraints.
06Precision nutrition improves mill economics
Medium confidenceNC State’s feed-mill research is focused on using sensors and AI to optimize nutrition, reduce costs and adjust ground ingredients to animal requirements. The stated commercial objective is to improve yield and reduce time to target weight through more precise formulation. ([sustainability.ncsu.edu](https://sustainability.ncsu.edu/blog/2026/03/11/using-ai-and-advanced-sensors-to-transform-feed-production/?utm_source=openai))[25]
Forecast 2027: Precision nutrition should move from pilot projects toward targeted commercial deployment in 2027, particularly in broiler, swine and aquaculture operations with detailed performance data. The near-term value proposition will be lower feed conversion and reduced nutrient overformulation rather than radical new ingredients.
07Additive compliance stays restrictive
High confidenceThe European Commission states that Regulation (EC) No 1831/2003 establishes common authorization, marketing, labeling and use rules for feed additives and premixtures. The Commission’s later evaluation identified administrative complexity around renewals, modifications and labeling. ([food.ec.europa.eu](https://food.ec.europa.eu/food-safety/animal-feed/feed-additives/legislation-feed-additives_en?prefLang=da&utm_source=openai))[12]
Forecast 2027: Regulatory scrutiny will remain high in 2027, especially for additives making health, methane-reduction or performance claims. Producers will favor well-documented additives and digital compliance systems, while smaller mills may face proportionally higher administrative costs.
08Sustainability shifts formulation priorities
Medium confidenceThe 2026 Alltech outlook identifies climate and sustainability challenges as major forces shaping feed markets. In North America, the report specifically cites sustainability pressure, formulation optimization and mill efficiency as factors reshaping the sector. ([alltech.com](https://www.alltech.com/agri-food-outlook?utm_source=openai))[2]
Forecast 2027: In 2027, sustainability requirements will increasingly influence ingredient sourcing, ration design, energy use and customer reporting. The strongest commercial uptake should occur where feed companies can link lower emissions or resource use to measurable animal-performance gains.
09Top producers remain geographically concentrated
High confidenceChina, the United States and Brazil produced 47.7% of global feed tonnage in 2025, while the top 10 countries accounted for 65.2%. China alone produced 330.1 million metric tons, compared with 267.4 million in the United States and 89.9 million in Brazil. ([alltech.com](https://www.alltech.com/press-release/2026-alltech-agri-food-outlook-shares-global-feed-production-survey-data?trk=article-ssr-frontend-pulse_little-text-block&utm_source=openai))[2]
Forecast 2027: The geographic concentration of feed production is likely to remain broadly stable through 2027, although India and other Asian markets should gradually increase their share. Capacity growth will continue to cluster near major livestock, poultry and aquaculture production systems.
10Feed safety and traceability expand
High confidenceEU feed-safety rules cover feed materials, compound feed, additives and premixtures, while the Rapid Alert System for Food and Feed enables authorities to share information in real time. The framework increases the importance of supplier controls, testing and traceability for mills. ([food.ec.europa.eu](https://food.ec.europa.eu/food-safety/campaign-2026/feed-safety_en?utm_source=openai))[12]
Forecast 2027: By 2027, feed mills will invest more in digital batch records, ingredient testing, mycotoxin monitoring and rapid recall capability. Compliance will become a competitive differentiator for exporters and suppliers serving integrated protein producers.
04 Statistics
Market Intelligence
We see country and category scale markers, including 1.396 billion metric tonnes produced globally in 2024 and $45,991.830 million U.S. sales for NAICS 311119 in 2024.
Market size, volume and shipments in the feed milling industry
- 28.9 million tonnes of livestock feed, excluding forages, were consumed in Canada in 2024 according to the national feed-consumption estimate.[1]
- 1.396 billion metric tonnes of animal feed were produced globally in 2024, covering commercial feed production across 142 countries in Alltech’s category definition.[2]
- 269.620 million metric tonnes of animal feed were produced in the United States in 2024, under Alltech’s feed-tonnage definition.[2]
- $45,991.830 million was U.S. sales, value of shipments or revenue in 2024 for NAICS 311119 Other Animal Food Manufacturing, the Census category covering animal food except dog and cat food.[3]
05 Statistics
Product & Standards
State ingredient rules set clear specification thresholds, including 15.0% maximum-moisture and 0.5% sodium for California commercial feed.
Standards, grades and specs for feed milling
- 15.0% moisture is the threshold above which commercial feed must carry a maximum-moisture guarantee under California’s commercial-feed ingredient rules.[4]
- 0.5% sodium is the threshold above which California commercial feed must carry a maximum sodium guarantee under the adopted ingredient-definition rules.[4]
- 1.0% is the maximum premix share at which a carrier ingredient may be omitted from the ingredient label and replaced by “roughage products” under California rules.[4]
- 373 official feed-ingredient definitions were listed in Chapter 6 of AAFCO’s 2025 Official Publication, using AAFCO ingredient-definition codes and names.[5]
06 Statistics
Production & Operations
Sampling and measured outcomes show where enforcement lands: 22% of 647 official feed samples in California in 2024 were violative.
Productivity and capacity use in the feed milling industry
- 1.0% labor productivity growth was recorded for U.S. animal food manufacturing (NAICS 3111) in 2025; the BLS measure is real output per hour worked.[6]
- 0.4% growth in hours worked was recorded for U.S. animal food manufacturing (NAICS 3111) in 2025.[6]
- 1.5% output growth was recorded for U.S. animal food manufacturing (NAICS 3111) in 2025, alongside the industry’s productivity measures.[6]
Defects and conformance in the feed milling industry
- 22% of 647 official feed samples collected in California in 2024 were violative under the state’s feed regulatory program.[4]
- 2,976 finished-feed and feed-ingredient samples were collected and tested through Missouri’s Feed and Seed Program in 2024, producing 28,989 individual assays.[7]
- 656 total feed samples were collected in California in 2024, including 223 complete or formula feeds and 210 single-ingredient samples.[4]
07 Statistics
People & Workforce
Workforce data anchors capacity planning with U.S. animal food manufacturing employment of 76,600 jobs in September 2026 and 75,300 jobs in October 2026.
Employment and hiring in the feed milling industry
- Animal food manufacturing employment is projected to grow 6.9% over 2024–2034 in the U.S. Employment Projections program.[8]
- 76,600 jobs were recorded in U.S. animal food manufacturing in September 2026, measured as nonfarm payroll employment under NAICS 3111.[8]
- 75,300 jobs were recorded in U.S. animal food manufacturing in October 2026, according to the latest available nonseasonally adjusted payroll table.[8]
Wages and labour costs in the feed milling industry
- Food batchmakers in U.S. animal food manufacturing had a median hourly wage of $21.07 in May 2023.[8]
- First-line production supervisors in U.S. animal food manufacturing had a median hourly wage of $33.24 in May 2023.[8]
- Animal food manufacturing production occupations had a median hourly wage of $22.43 in May 2023 under NAICS 311100.[8]
08 Statistics
Pricing & Finance
U.S. producer price indexes track feed inputs and categories, including 180.077 for October 2026 chicken and turkey feed under product code 311119-1.
Prices and price indices for feed milling
- 383.789 was the October 2026 U.S. producer price index for poultry and non-cattle/non-swine livestock feed (product code 311119-N; December 1980=100).[8]
- 163.738 was the October 2026 U.S. producer price index for complete swine feed, supplements, concentrates and premixes (product code 311119-B; December 2011=100).[8]
- 180.077 was the October 2026 U.S. producer price index for chicken and turkey feed, supplements, concentrates and premixes (product code 311119-1; December 1980=100).[8]
- 254.670 was the October 2026 U.S. producer price index for other animal food manufacturing (NAICS 311119; December 1980=100).[8]
09 Statistics
Trade & Footprint
Trade flows provide footprint context, including £3,396 million of animal feed imported into the United Kingdom in 2024.
Imports and exports of feed milling
- £687 million of animal feed was exported from the United Kingdom to EU countries in 2024 at 2024 prices, under SITC Division 08.[9]
- £1,201 million of animal feed was exported by the United Kingdom in 2024 at 2024 prices, under SITC Division 08.[9]
- £3,396 million of animal feed was imported by the United Kingdom in 2024 at 2024 prices, under SITC Division 08.[9]
- £1,370 million of animal feed was imported by the United Kingdom from non-EU countries in 2024 at 2024 prices, under SITC Division 08.[9]
Tariffs and trade policy for feed milling
- 1.4% is the U.S. general duty rate for certain other preparations used in animal feeding under HTSUS 2309.90.70 and 2309.90.95, effective in the 2025 HTS revision.[10]
- 1.9% is the U.S. general duty rate for animal feeds containing egg under HTSUS 2309.90.60, effective in the 2025 HTS revision.[10]
- 7.5% is the U.S. general duty rate for certain preparations used in animal feeding under HTSUS 2309.90.42 and 2309.90.44, effective in the 2025 HTS revision.[10]
10 Statistics
Regulation & Risk
Compliance timelines and inspection rates frame operational risk, including the 2026 FDA registration deadline of December 31, 2026 and 21.6% fully compliant commercial feed mills in Great Britain in 2024.
Regulations and compliance for feed milling
- U.S. facilities must cancel an FDA food-facility registration within 60 calendar days after an ownership change and submit a new registration reflecting the new owner under 21 CFR 1.234–1.235.[11]
- All EU feed-business operators must be registered or approved by national authorities, while establishments handling sensitive additives, premixtures or compound feed require approval under Regulation (EC) No 183/2005.[12]
- Every U.S. animal-food facility, including feed mills, must renew FDA registration biennially from October 1 through December 31 in each even-numbered year; the 2026 renewal deadline is December 31, 2026.[11]
Enforcement and penalties in the feed milling industry
- 51 inspections were conducted at commercial feed mills in Great Britain during 2024 under the Veterinary Medicines Directorate feed-control programme.[9]
- 463 inspections of feed mills were conducted in Great Britain in 2024 under the National Feed Audit for processed-animal-protein controls.[9]
- 21.6% of inspected commercial feed mills in Great Britain were fully compliant in 2024, down from 26.5% in 2023.[9]
Key questions about the feed milling industry
What is the size of the global feed milling market in 2025?
How fast is global feed output growing into 2026?
Which companies lead the feed milling industry?
What technology shifts are showing up in feed mills?
How concentrated is production across countries?
What regulatory timeline matters for U.S. feed mill operators in 2026?
Cite This Report
This report is designed to be cited. We maintain stable URLs and versioned verification dates. Copy the format appropriate for your publication below.
Samuel Norberg. (2026, November 21). Feed Milling Industry Statistics. Gitnux. https://gitnux.org/feed-milling-industry-statistics
Samuel Norberg. "Feed Milling Industry Statistics." Gitnux, 21 Nov 2026, https://gitnux.org/feed-milling-industry-statistics.
Samuel Norberg. 2026. "Feed Milling Industry Statistics." Gitnux. https://gitnux.org/feed-milling-industry-statistics.
Sources & references
25 sources cited across this report
- anacan.org
alltech.com
data.census.gov
cdfa.ca.gov
aafco.org
blsmon1.bls.gov
agriculture.mo.gov
bls.gov
assets.publishing.service.gov.uk
learning.usitc.gov
fda.gov
food.ec.europa.eu
feedsoft.com
fsa.usda.gov
feedandgrain.com
- ourcoop.com
agrimarketing.com
careers.nutreco.com
deheus.com
d3bozysj9qkbnw.cloudfront.net
adm.com
ag.purdue.edu
ers.usda.gov
aphis.usda.gov
sustainability.ncsu.edu
