GITNUX MARKETDATA REPORT 2024

Stud Spacing Measurement Statistics

Stud spacing measurement statistics will provide information on the average distance between studs in a given sample population.

With sources from: gypsum.org, blog.homestars.com, usg.com, moen.com and many more

Statistic 1

Standard stud spacing in housing is 16 inches on center

Statistic 2

The minimum thickness of bearing partition steel stud is 0.033 inch (34 mil)

Statistic 3

Maximum height for a drywall wall with studs spaced at 24 inches is 30 feet

Statistic 4

The maximum allowable eccentricity for header and jamb studs is 1/600 of the stud height

Statistic 5

Studs are typically sized at 2x4 or 2x6 inches with centres spaced 16 inches apart

Statistic 6

Stud spacing more than 16 inches on center will likely result in a failed remodel inspection

Statistic 7

The average depth for wall studs is 3.5 inches

Statistic 8

Insulation for 2x6 walls is typically R-19 while for 2x4 walls it's generally R-13

Statistic 9

Studs typically weigh around 26 pounds but can vary based on wood type and size

Statistic 10

Typical maximum spacing for ceiling joists is 24 inches

Statistic 11

A standard gypsum wallboard panel is cut to have a width that fits a frame with studs 16 inches apart

Statistic 12

Wood stud walls can withstand higher wind loads with studs spaced 16 inches or less apart

Statistic 13

Floors constructed with 2x10 joists spaced 16 inches apart can span up to about 17 feet

Statistic 14

The National Building Code of Canada specifies that stud spacing should not exceed 600mm (approximately 24 inches)

Statistic 15

Stud walls made of lightweight steel are typically spaced at 600mm intervals

Statistic 16

Metal studs are lighter than wood, with 25 gauge steel stud weighing about 0.63lb/ft, as compared to a wood stud that typically weighs around 1.5lb/ft.

Statistic 17

Australian building codes generally specify a maximum stud spacing of 600mm center to center, though this can be lower depending on the building requirements.

Statistic 18

Load-bearing walls more than 10 feet in height may require studs to be spaced 12 inches apart

Statistic 19

For non-load bearing walls, the typical spacing in Australia is 600mm, but can be up to 900mm for some types of plasterboards.

Sources Icon Sources

In this post, we explore various statistics related to stud spacing measurements in construction, including standard dimensions, load-bearing capacities, insulation considerations, and international building code specifications. Understanding these statistics is crucial for ensuring structural integrity and compliance with industry standards.

Statistic 1

"Standard stud spacing in housing is 16 inches on center"

Sources Icon

Statistic 2

"The minimum thickness of bearing partition steel stud is 0.033 inch (34 mil)"

Sources Icon

Statistic 3

"Maximum height for a drywall wall with studs spaced at 24 inches is 30 feet"

Sources Icon

Statistic 4

"The maximum allowable eccentricity for header and jamb studs is 1/600 of the stud height"

Sources Icon

Statistic 5

"Studs are typically sized at 2x4 or 2x6 inches with centres spaced 16 inches apart"

Sources Icon

Statistic 6

"Stud spacing more than 16 inches on center will likely result in a failed remodel inspection"

Sources Icon

Statistic 7

"The average depth for wall studs is 3.5 inches"

Sources Icon

Statistic 8

"Insulation for 2x6 walls is typically R-19 while for 2x4 walls it's generally R-13"

Sources Icon

Statistic 9

"Studs typically weigh around 26 pounds but can vary based on wood type and size"

Sources Icon

Statistic 10

"Typical maximum spacing for ceiling joists is 24 inches"

Sources Icon

Statistic 11

"A standard gypsum wallboard panel is cut to have a width that fits a frame with studs 16 inches apart"

Sources Icon

Statistic 12

"Wood stud walls can withstand higher wind loads with studs spaced 16 inches or less apart"

Sources Icon

Statistic 13

"Floors constructed with 2x10 joists spaced 16 inches apart can span up to about 17 feet"

Sources Icon

Statistic 14

"The National Building Code of Canada specifies that stud spacing should not exceed 600mm (approximately 24 inches)"

Sources Icon

Statistic 15

"Stud walls made of lightweight steel are typically spaced at 600mm intervals"

Sources Icon

Statistic 16

"Metal studs are lighter than wood, with 25 gauge steel stud weighing about 0.63lb/ft, as compared to a wood stud that typically weighs around 1.5lb/ft."

Sources Icon

Statistic 17

"Australian building codes generally specify a maximum stud spacing of 600mm center to center, though this can be lower depending on the building requirements."

Sources Icon

Statistic 18

"Load-bearing walls more than 10 feet in height may require studs to be spaced 12 inches apart"

Sources Icon

Statistic 19

"For non-load bearing walls, the typical spacing in Australia is 600mm, but can be up to 900mm for some types of plasterboards."

Sources Icon

Interpretation

In conclusion, the statistics presented shed light on the various standards and guidelines surrounding stud spacing in construction, particularly in housing structures. The data indicates that spacing studs at 16 inches on center is a common practice for ensuring stability and integrity in walls, with deviations from this measurement likely resulting in issues during inspections. Additionally, the information highlights the importance of considering factors such as stud thickness, wall height, eccentricity, and material type in construction projects to meet building codes and safety requirements. These insights provide valuable guidance for professionals in the construction industry to make informed decisions when planning and executing building projects.

Can You Trust Our Report?

The statistics are checked by us and then entered into the database. Our market data reports have been linked to by some of the largest publishers and companies on the Internet.

Learn more about our process here.

Submit Your Own Statistic Data

Would you like to submit your own researched statistics on this topic? You are welcome to use the form below and submit your suggestion to us. We will check the source and approve it if necessary.

... Before You Leave, Catch This! 🔥

Your next business insight is just a subscription away. Our newsletter The Week in Data delivers the freshest statistics and trends directly to you. Stay informed, stay ahead—subscribe now.

Sign up for our newsletter and become the navigator of tomorrow's trends. Equip your strategy with unparalleled insights!